Vestil Frequently Asked Questions
Enter A Model or Keyword(s) To Find A Question & Answer
| Question | Answer | Models |
|---|---|---|
| Where are you located? | Angola, Indiana 46703, USA | |
| Do you sell direct? | No. We sell through our distributor network. | |
| How do I get parts for my Vestil product? | You can Click Here and use the form or Chat with a Parts Expert. Or, you can email parts@vestil.com | |
| Does my carrier need to schedule a pick up time? | Pick up times are from 12 p.m - 3 p.m. EST . First come, first serve. | |
| What are the hours for receiving? | Receiving hours are 7 a.m. to 3 p.m. EST. | |
| Do you have overnight parking for freight deliveries? | No, overnight parking is not available. | |
| What are the hours of the parts department? | The parts department is available 7 a.m. to 4:30 p.m. EST. | |
| Do you have outside sales representatives? | Our sales team would be happy to help. They can be reached at 260-665-7586 x 760. We do not have outside field reps. | |
| Why should I use Vestil Freight Advantage? | Click Here for all the advantages of using Vestil Freight Advantage | |
| Do you sell used or damaged products? | Yes! Click Here to see our inventory of Scratch & Dent Items | |
| How do I find a Vestil Distributor in my area? | Click Here to receive a list of Vestil Distributors in your area | |
| Do you make custom or modified products? | Click Here for a quote on Custom Fabrication | |
| Where can I find a Manual for my product? | You can find the manual on the product page, or Click Here to search all of our manuals | |
| Where can I find Safety Data Sheets (SDS) for my product? | You can find the SDS on the product page, or Click Here to search all of our Safety Data Sheets. | |
| What is your product return policy? | Click Here for Vestil Return Policy | |
| What are the different colors I can get my product painted? | Click Here for all the different colors of Powder Coat or Liquid Paint we offer. | |
| What are some of the new products you offer? | Click Here for a list of some of Vestil's latest product additions. | |
| Can I get an engineering drawing for my product? | You can find Drawings on the product page, or Click Here to search all of our Drawings. | |
| How can I get on your mailing list for latest Vestil news? | Yes, you can join at the bottom of every page on our site, or Click Here to view our archived mailers | |
| Is there a list of specialty products? | Click Here for a list of Specialty Products |
Enter A Model or Keyword(s) To Find A Question & Answer
| Question | Answer | Models |
|---|---|---|
| What type of steel is the EXCNV-S-24-24 is constructed from? | Steel ASTM 1045 is used for EXCNV-S-24-24 | EXCNV-S-24-24 |
| What are RWC-8's made of? | Molded rubber. | RWC-8, Wheelchocks |
| What is the impact rating of the guard rail? | The impact rating of the guard rail is 4,000 lbs. at 4 MPH. | YGR |
| What is the difference between the HDC-905-IDC and the HDC-905-HC? | The IDC (standard model) will manage up to 15 cycles per hour. The HC (high cycle) can be used continuously. | HDC-905 |
| What is the length of the cable on the EMH-3? | The length of the cable on the EMH-3 is 90 ft. | EMH-3 |
| What grade of steel is used on the GR-12? | 10 GA hot rolled steel is used on the GR-12. | Guardrail |
| Are the fork extensions sold in a pair? | Yes, the fork extensions are sold in pairs. | Fork Extensions |
| Are the fork extensions sold in a pair? | Yes, the fork extensions are sold in pairs. | Fork Extensions |
| Are the fork extensions sold in a pair? | Yes, the fork extensions are sold in pairs. | FE-4-48 |
| How long is the chain on the EHN-40-C? | The chain on the EHN-40-C is 7". | EHN |
| I'm looking at the low profile hopper . Does it come with casters? | Casters are available for the H- Style Low Profile Hopper. Please see the hopper home page for multiple options. | H-25-LD,H-50-LD,H-100-LD,H-150-LD,H-25-MD,H-50-MD,H-100-MD,H-150-MD,H-25-HD,H-50-HD,H-100-HD,H-150-HD |
| I'm interested in adding the 42" forks to the S-2CB-62 stacker. What would the load center be with the longer forks? | The S-2CB-42-FK load center would be 21" when installed on the S-2CB-62 stacker. | S-2CB-62 |
| What is the distance in between the legs on the DRUM-55-SCL? | The inside dimension between the legs of the DRUM-55-SCL is 25". | DRUM-55-SCL |
| How large a reel (outside diameter) will work with the MWP-RR? | The MWP-RR can accommodate a reel with a maximum exterior measurement of 9-13/16". | MWP |
| Are the end caps sold individually? | The SBRY-CAP-A are sold in pair. | SBRY-CAP-A |
| Are the end caps sold individually? | The SBRY-CAP-C are sold in pair. | SBRY-CAP-C |
| What is the thickness of the top of the table? | The top plate on the EHLT is 1/4" thick. | EHLT |
| What is the capacity of the reel rotator? | The MWP-RR reel rotator has a capacity of 200 lbs. | MWP-RR |
| What is the capacity of the floor lock? | The FL-LK-4E has a capacity of 1200 lbs. | FL-LK-4E |
| How far apart are the rails from each other? | The distance of the SPR-120-W is 7 1/4" from rail to rail. | SPR-120-W |
| How far apart are the rails from each other? | The distance of the SPR-120-Y is 7 1/4" from rail to rail. | SPR-120-Y |
| Is installation hardware included? | Yes, installation hardware is included with the D-150/650 dock seal/shelter combo. | D-150/650 |
| I'm interested in the Boom, but my forks are 8". Are there larger fork pockets? | We are able to modify the fork pocket size of the LM-EBT-4-24. Please contact one of our sales associates for assistance. | LM-1T-4-24,LMOBT-4-24,LM-EBT-4-24,LM-1T-4-6-24,LM-OBT-6-24,LM-EBT-6-24,LM1T-8-24,LM-OBT-8-24,LM-EBT-8-24,LM-1NT-4-24,LM-OBNT-4-24,LM-EBNT-4-24,LM-1NT-6-24,LM-OBNT-6-24,LM-EBNT-6-24,LM-1NT-8-24,LM-OBNT-8-24,LM-EBNT-8-24,LMS-EBT-46-4,LMS-EBT-46-6,LMS-EBT-46-8,LMS-EBNT-40-4,LMS-EBNT-40-6,LMS-EBNT-40-8 |
| I'm not able to find the size of carpet pole I need. Are there additional length poles? | The carpet poles are available in lengths of 40" to 144". Please contact a sales associate for details. | CRP-108,CRP-120,CRP-144,CRF-108,CRF-120,CRF-144,CR-108-2,CRF-120-2,CR-144-2,CR-108-3,CR-120-3,CR-144-3 |
| I'm looking at the self dumping hopper . Does it come with casters? | Casters are available for the D- Style Self-Dumping Hopper. Please see the hopper home page for multiple options. | D-25-LD,D-33-LD,D-50-LD,D-75-LD,D-100-LD,D-150-LD,D-200-LD,D-250-LD,D-300-LD,D-25-MD,D-33-MD,D-50-MD,D-75-MD,D-100-MD,D-150-MD,D-200-MD,D-250-MD,D-300-MD,D-25-HD,D-33-HD,D-50-HD,D-75-HD,D-100-HD,D-150-HD,D-200-HD,D-250-HD,D-300-HD,D-350-HD,D-400-HD |
| How long does it take to charge the battery for the E-TUG-30 ? | The battery for the E-TUG-10, E-TUG-20, and E-TUG-30 will be fully charged in approximately 5 hours. If the battery is dead it may take up to 8 hours to be fully charged. | E-TUG-10, E-TUG-20, E-TUG-30 |
| How long will the E-TUG-10 run? | The E-TUG-10, E-TUG-20, and E-TUG-30 will operate approximately 4 hours of continuous use on a fully charged battery. For intermittent use, you can expect 8 hours . | E-TUG-10, E-TUG-20, E-TUG-30 |
| What is the diameter of the E-TUG-PINH? | The diameter of the pin (E-TUG -PINH) is approximately 3/4". | E-TUG-PINH,E-TUG-10,E-TUG-20,E-TUG-30 |
| Can the tugger be used on an incline? | The E-TUG-10, E-TUG-20, and E-TUG-30 will operate efficiently on a slope of 2-3 degrees. | E-TUG-10, E-TUG-20, E-TUG-30 |
| How much weight can each storage level hold? How far are the bins from outside to the pole? | The capacity levels from bottom to top are: Lower bin 75 lbs., 60lbs., 50 lbs. and the top bin 3 lbs. From the inside pole to the outside of the bins is 9 13/16". | PBIN-19 |
| Does the gate swing shut? | The SDG-8, SDG-9, and SDG-10 are closed manually. | SDG-8, SDG-9, SDG-10 |
| I'm looking at the HBD-4-60 but need a higher dump height. | Our engineering team may be able to accommodate your height request. Please contact one of our sales associates to request a modified box dumper quote. | HBD-2-36,HBD-2-48,HBD-2-60,HBD-4-36,HBD-4-48,HBD-4-60,HBD-6-36,HBD-6-48,HBD-6-60 |
| What qualifies as a "start" for the box dumper? We will be using it consistently during the shift. | The standard power unit can accommodate 15 starts per hour. A "start" is when the motor is started or the button is pushed ( on, off, up, down). An extended duty continuous run power unit is available for the box dumper. Please contact a sales associate for more information. | HBD-2-36,HBD-2-48,HBD-2-60,HBD-4-36,HBD-4-48,HBD-4-60,HBD-6-36,HBD-6-48,HBD-6-60 |
| What grade stainless steel is the FL-ADJ-46-SS? | The FL-ADJ-46-SS and the FL-ADJ-810-SS are composed of 304 grade Stainless Steel. | FL-ADJ-46-SS, FL-ADJ-810-SS |
| I'm interested in the steel safety railing. When using the double socket what is the gap between the two railings? | When using the VDKR-P102 socket the distance between the two railings is approximately 1". | VDKR-P102 |
| What size is the hole where the hook attaches to the boom? | The diameter of the opening where the hook attaches is 11/16". | LM-1T-4-24,LMOBT-4-24,LM-EBT-4-24,LM-1T-4-6-24,LM-OBT-6-24,LM-EBT-6-24,LM1T-8-24,LM-OBT-8-24,LM-EBT-8-24,LM-1NT-4-24,LM-OBNT-4-24,LM-EBNT-4-24,LM-1NT-6-24,LM-OBNT-6-24,LM-EBNT-6-24,LM-1NT-8-24,LM-OBNT-8-24,LM-EBNT-8-24 |
| I am interested in the paper dispenser stand. Is there a serrated blade for cutting the paper? | The paper dispenser stands have a straight edge. There is not a serrated blade on them. | PDS-2-24,PDS-2-30,PDS-2-36,PDS-2-48,PDS-3-24,PDS-3-30,PDS-3-36,PDS-3-48 |
| What gauge steel is the storage building? | The STOR-96-G-1RH and STOR-912-G-W-1RH are constructed of 22 gauge corrugated steel siding. | STOR-96-G-1RH,STOR-912-G-W-1RH |
| We are in the food industry and are interested in the stainless steel thin spin. Is it designed for washdown? | The stainless steel thin spins models LP-4000T-SS,LP-4000T-45-SS and LP-4000T-39-SS are not designed for washdown. Water would collect and pool in the grooves that contain the ball bearings. | LP-4000T-SS,LP-4000T-45-SS,LP-4000T-39-SS |
| What gauge steel is the DSG-48? | The DSG-48 is 12 gauge steel. | DSG-48 |
| What grade stainless steel is the workmate stand? | The adjustable work mate stands are constructed of 304 grade stainless steel. | AHW-L-1924-SS,AHW-L-2424-SS,AHW-L-1936,AHW-L-2436-SS,AHW-L-1948-SS,AHW-L-2448-SS,AHW-L-2460-SS,AHW-L-2472-SS,AHW-L-2496-SS,AHW-H-1924-SS,AHW-H-2424-SS,AHW-H-1936-SS,AHW-H-2436-SS,AHW-H-1948-SS,AHW-H-2448-SS,AHW-H-2460-SS,AHW-H-2472-SS,AHW-H-2496-SS |
| Are there mounting holes for the guard rail on one side? | There are mounting holes on all four sides of all the Rigid Post models. | YGR-TP18, YGR-TP42,YGR-TP-TP60,YGR-TP72 |
| How fast does the PEL raise and lower? | All PEL's, 88, 400, and A models are about the same speed fully loaded, or unloaded at maximum speed setting approximately 3.6 inches per second up, and 4.5 in/second down. The PEL100A is slightly slower because the pitch on the screw is different. The speed can be slowed down via the touchpad speed control. PEL88, 88A, 400-57 is approximately 14 seconds raise, 11 seconds lower time. PEL 100, 100A, and 400-72 is approximately 18 seconds raise, 15 seconds lower time. | PEL-88,PEL-100,PEL400 |
| How noisy is the PEL? | The Steel units (PEL88, PEL100, PEL400) measure about 63 dB at a distance of 1 foot from the motor enclosure. At 3 feet the level drops to about 59 dB. The units are at least this quiet when rolling too. The Aluminum units are noisier, and would have to be measured on an individual basis. | PEL-88,PEL-100,PEL400 |
| How many cycles can I get on one charge and how long does it take to charge? | This will vary depending on how high the load is lifted, how much weight is lifted, the age of the batteries, and the battery type. The PEL88, 88A, and 100 will last about 200 cycles continuous or, 1 cycle every 5 minutes for 8 hours. Charge time is anywhere from 4 to 6 hours depending on the condition of the battery, age, etc The PEL400 will last about 300 to 400 cycles continuous or, 1 cycle every 4 minutes for 8 hours. Charge time is anywhere from 6 to 8 hours depending on the condition of the battery, age, etc. | PEL-88,PEL-100,PEL400 |
| Does the truck jib come with a charger? | The WTJ is intended to be hooked up to a truck battery. If using the jib in some other application other than mounting on a truck, we suggest a 12V car battery that can be purchased at most stores locally. If the jib is hooked up to truck, a charger is not needed. If using in some other application, a charger can be purchased with the battery. | WTJ-2,WTJ-4,WTJ-2-G,WTJ-4-G,WTJ-2-SS,WTJ-4-SS |
| Is the scale calibrated before it is shipped? | Yes the scales are calibrated before shipping. There is no need to set the GEO code after receiving. The scales are self adjusting. | SCALE-S-CFT-44-5K,SCALE-S-CFT-55-5K,SCALE-S-CFT-44-10K,SCALE-S-CFT-55-10K |
| What is the diameter of the FM-BAR used with edge o dock leveler? | The diameter of the FM-BAR is approximately 1 5/16". | FM-0648,FM-2066,FM-2072,FM-2078,FM-2566,FM-2572,FM-3066,FM-3072,FM-BAR |
| We are interested in the AIR-J fork truck jack. If an air compressor is not available can we use a manual pump. | The AIR-J will not operate with the use of a manual pump. | AIR-J |
| We are looking at the light/siren option for the bollard. How long does the light stay on? | The light and siren option for the spring bollard will continue until the bollard stops vibrating. | SPBOL-42-BL, SPBOL-BL |
| We are installing the safety railing and using the double socket. VDKR-P102. How much does it add to the length of the safety railings? | The VDKR-P102 double socket has approximately 1" in between the two railings | VDKR-P102 |
| We have a slight incline about 10 degrees and need to lift about 2,000 lbs. with the electric pallet truck. Will that be possible? | The EPT-2047-30 is capable of lifting up to 2,500 lbs. at a 10 degree incline. | EPT-2047-30 |
| Does the gantry come with a hoist? | The hoists and trolleys for the fixed height steel gantry cranes are sold separately. You'll find multiple options available. | FHS-50,FHS-2-10,FHS-2-15,FHS-2-20,FHS-4-10,FHS-4-15,FHS-4-20,FHS-6-10,FHS-6-15,FHS-6-20,FHS-8-10,FHS-8-15,FHS-8-20,FHS-10-10,FHS-10-15 |
| Does the gantry come with a hoist? | The hoists and trolleys for the adjustable height steel gantry cranes are sold separately. You'll find multiple options available. | AHS-2-10-12, AHS-2-15,14,AHS-2-20-16, AHS-4-10-14, AHS-4-10-16, AHS-4-15-12, AHS-4-15-16,AHS-4-20-12, AHS-6-10-14, AHS-6-15-10, AHS-6-15-14,AHS-6-20-14, AHS-8-10-12, AHS-8-15-14, AHS-8-20-12, AHS-8-20-16, AHS-10-15-10 |
| Is there a ramp we can use with the low profile scissor lift table? | Yes we have approach ramps which are a great addition to the low profile scissor lift tables. You'll find that information under the options tab of the EHLTX information page. The ARX-3639-3 can be used with one and two thousand lb. capacity tables. For the 3 and 3.5 lb. capacity the ARX-3654-4 is the perfect transition from the pallet truck to the table. | EHLTX |
| Is the hardware included for the locking floor bracket? | The floor bracket has mounting holes that accommodate 1/4" hardware which is not included. | SSG-9, SSG-11 |
| We purchased the work platform and want casters added. Is it possible to add them now? | The options for the work platform include casters, emergency stop button kit, fluorescent tube caddy, and tool tray and can be purchased at any time. Please see the options tab on the work platform information page. | WP-3636,WP-3648,WP-4848,WP-4848-FF,WP-3636-84B,WP-3648-84B,WP-4848-84B,WP-4848-84B,FF,WP-3636-DD,WP-3648-DD,WP-4848-DD,WP-4848-84B-DD-FF |
| Is there a safety harness with the work platform? | The lanyard with safety harness is available in sizes small through xxx-large. Please see the options tab on the work platform information page. | WP-3636,WP-3648,WP-4848,WP-4848-FF,WP-3636-84B,WP-3648-84B,WP-4848-84B,WP-4848-84B,FF,WP-3636-DD,WP-3648-DD,WP-4848-DD,WP-4848-84B-DD-FF |
| What is the diameter of the bails? | The lower bails have a 1" diameter. The upper bail has a 1 14"diameter. | SBM-25,SBM-40,SBM-80 |
| How is the scale powered on this steel platform truck? | The LCD scale operates on 6 AA batteries. The scale has 5 function keys including Zero, Tare, Net/Gross, Print, LB. /KG. Scale head includes port for serial printing. | SPT-2448-SCL, SPT-3060-SCL, SPT-3672-SCL |
| What is the battery life on the semi electric pallet truck? | The EPT-S-2748 battery life is approximately 4-8 hours with moderate/ intermittent use. For continuous use, battery life is approximately 1-3 hours. The battery life may be impacted by the weight and distance of the load being transported. | EPT-S-2748-33 |
| Does the scale measure in lbs. or kgs? | The scale defaults to measurement in pounds. There is a function to convert measurement to Kilograms. | PM-2048-SCL-LP.PM-2748-SCL-LP,PM-2048-SCL-LP-PT,PM-2748-SCL-LP-PT,PM-2045-SCL-LP-SS,PM-2745-SCL,LP-SS |
| What are the dimensions of the flag pole base? | The base is 14" in diameter. There are 6 mounting holes 3/4" that are spaced 6" around the circumference of the base. The mounting holes are 9/16" from the outside edge. | FLP-20-SS, FLP-25-SS |
| If we order the V-Groove system, is it possible to keep the gantry on the rail if we only have one person pushing the crane on one side? | We recommend pushing the gantry on both sides when re-positioning it. The V-groove options makes moving much easier. | AHS-2-10-12, AHS-2-15,14,AHS-2-20-16, AHS-4-10-14, AHS-4-10-16, AHS-4-15-12, AHS-4-15-16,AHS-4-20-12, AHS-6-10-14, AHS-6-15-10, AHS-6-15-14,AHS-6-20-14, AHS-8-10-12, AHS-8-15-14, AHS-8-20-12, AHS-8-20-16, AHS-10-15-10 |
| We are looking at the V-Groove system. Is it possible to keep the gantry on the rail with one person pushing the crane on one end? | The V-Groove option makes moving much easier. We recommend pushing the gantry on both ends when re-positioning it. | FHS-50,FHS-2-10,FHS-2-15,FHS-2-20,FHS-4-10,FHS-4-15,FHS-4-20,FHS-6-10,FHS-6-15,FHS-6-20,FHS-8-10,FHS-8-15,FHS-8-20,FHS-10-10,FHS-10-15 |
| If we order the V-Groove system, is it possible to keep the gantry on the rail if we only have one person pushing the crane on one side? | We recommend pushing the gantry on both sides when re-positioning it. The V-groove options makes moving much easier. | AHA-2-8-8, AHA-2-10-12, AHA-2-15-12,AHA-4-8-10,AHA-4-10-10,AHA-4-12-8,AHA-4-15-12,AHA-6-8-12,AHA-6-12-10,AHA-6-15-12 |
| If we order the V-Groove system, is it possible to keep the gantry on the rail if we only have one person pushing the crane on one side? | We recommend pushing the gantry on both sides when re-positioning it. The V-groove options makes moving much easier. | FHA-2-8-10, FHA-2-10-10, FHA-2-15-10,FHA-4-8-10,FHA-4-10-10,FHA-4-12-10,FHA-4-15-10,FHA-6-8-10,FHA-6-10-10,FHA-6-15-10 |
| What is the difference between the LOW-1P and the LOW-1G trolley? | The LOW-x-P (push trolley) is moved by pushing it along the I-beam. The LOW-x-G (geared trolley) is moved by pulling a chain which rotates gears and moves the trolley along the I-beam. | LOW-1P,LOW-2P,LOW-4P,LOW-6P,LOW-1G,LOW-2G,LOW-4G,LOW-6G |
| I am interested in the floor mounted JIB. I have concrete where I want to install it. Must we pour a new foundation? | Because we do not know the condition and strength of the users concrete, pouring a new foundation is the only way we can guarantee the unit will not fail. We can only recommend installing per the instructions in the owners manual. Normal use of the jib causes vibrations that could potentially loosen a wedge anchor. We spec out J-anchors for use in new concrete. | JIB-FM-3,JIB-FM-6,JIB-FM-10,JIB-FM-20,JIB-FM-40 |
| What are the dimensions of the stairs on the stockpicker truck? | The stairs on the stockpicker truck are 17 3/4" wide x 5" deep. | SPA2-2236,SPA3-2236,SPS2-2236,SPS3-2236 |
| What are the dimensions of the stairs on the stockpicker truck? | The stairs on the stockpicker truck are 23 3/4" wide x 5" deep. | SPA2-2840,SPA2-2848,SPA3-2840,SPA3-2848,SPS2-2840,SPS2-2848,SPS3-2840,SPS3-2848 |
| I am interested in the multi station JIB. I have concrete where I want to install it. Must we pour a new foundation? | Because we do not know the condition and strength of the users concrete, pouring a new foundation is the only way we can guarantee the unit will not fail. We can only recommend installing per the instructions in the owners manual. Normal use of the jib causes vibrations that could potentially loosen a wedge anchor. We spec out J-anchors for use in new concrete. | JIB-P-10-6-6,JIB-P-10-6-8,JIB-P-10-6-10,JIB-P-10-8-6,JIB-P-10-8-8,JIB-P-10-8-10,JIB-P-10-10-6,JIB-P-10-10-8,JIB-P-10-10-10,JIB-P-B |
| What is the capacity of the arms on the AFSR-3672? | The capacity of the arm is 70lbs. each. Each storage bay can accommodate up to 140 lbs. The load must be evenly distributed. | AFSR-3672 |
| I purchased the PEL-88. Can I add the push button control myself? PEL-2PB? | Yes the PEL-2PB option can be installed in the field. | PEL-88, PEL-100,PEL-400-57,PEL-400-72,PEL-88-A,PEL-100-A,PEL-88-AC,PEL-400-AC,PEL-88-AC/DC,PEL-400-AC/DC,PEL-2PB |
| How many extensions can I add to the pigeon hole rack LBPH-77? | You can add an unlimited number of extensions (LBPH-EXT)to the LBPH-77. The capacity is 7700 lbs. with the extensions. | LBPH-77,LBPH-EXT |
| Are the rubber wheel chocks solid rubber or hollow? | The rubber wheel chocks are not solid. | RWC-2-PR,RWC-3,RWC-5,RWC-8,RWC-8/OH-15-HD,RWC-8-HDL,RWC-9-U,RWC-8-SBS,RWC-10-HDL,RWC-11,RWC-25 |
| Can the pop-up ball transfer be mounted on a table or cart? | Yes. The pop up ball transfer can be mounted here in the factory to a table or cart. For example the POPUP-1932 can be mounted to the CART-750-TS. Please contact a sales associate for information and details. | POPUP-1932, POPUP-4048 |
| Can the drum carrier/rotator be used with plastic drums? | Yes. Adapters are available for the DCR-205 products that work with most plastic and fiber drums. Please see the options tab on the drum carrier/rotator page and select the drum adapter link. | DCR-205-8,DCR-205-15,DCR-205-20,DCR-205-8-DC,DCR-205-12-DC |
| Are the car stops hollow or solid recycled plastic? | The car stops are solid. | CS-33-G,CS-33-Y,CS-33-B,CS-33-W,CS-S24-G,CS-S24-Y,CS-S24-B,CS-S24-W,CS-S48-G,CS-S48-Y,CS-S48-B,CS-S48-W,CS-S72-G,CS-S72-Y,CS-S72-B,CS-S72-W,CS-TB96-G,CS-TB96-Y,CS-TB96-B,CS-TB96-W |
| Can the portable pallet inverter pick up a loaded pallet? | The portable pallet inverter (part number PI-P-4400-3254) can be used to pick up skids. Please see the straddle model options to pick up pallets or skids. (PI-P-SL-3000-3254, PI-P-SL-3000-3276, or PI-P-SL-3000-4088). | PI-P-4400-3254,PI-P-SL-3000-3254,PI-P-SL-3000-3276,PI-P-SL-3000-4088 |
| Is S-CB-118 a class 2 carriage? | This is not a class 2 carriage. | S-CB-118 |
| Are the forks removable on the S-CB-118? | Yes! The forks on the S-CB-118 are removable. | S-CB-118 |
| What is the schedule of the bollard? | The 2" bollard is 1 1/4" schedule-10 pipe. (.109" wall) | BOL-24-2,BOL-36-2,BOL-42-2,BOL-48-2 |
| What is the schedule of the bollard? | The 4.5" bollard is 4" schedule-10 pipe. (.120" wall) | BOL-24-4.5,BOL-36-4.5,BOL-42-4.5,BOL-48-4.5,BOL-62-4.5,BOL-72-4.5 |
| What is the schedule of the bollard? | The 5.5" bollard is 5" schedule-10 pipe. (.134" wall) | BOL-24-5.5,BOL-36-5.5,BOL-42-5.5,BOL-48-5.5,BOL-62-5.5,BOL-72-5.5 |
| What is the schedule of the bollard? | The 6.5" bollard is 6" schedule-10 pipe. (.134" wall) | BOL-36-6.5,BOL-42-6.5,BOL-48-6.5,BOL-62-6.5,BOL-72-6.5 |
| What is the schedule of the bollard? | The 8.5" bollard is 8" schedule-10 pipe. (.148" wall) | BOL-36-8.5,BOL-42-8.5,BOL-48-8.5 |
| How much push/pull force is needed for the CA-48-6? | Approximately 40-45 lbs. of force is needed for the CA-48-6. | CA-48-6 |
| We are interested in the EHLT 1,000 lb. capacity lift table with a table top of 48 x 48. We want to change the voltage to 115 single phase. What is the travel time to the raised height. | For the EHLT-4848-1-43 with a 115 voltage, the raised time to 43" is 15 seconds. 16 seconds to the lowered height of 7". | EHLT-1-43 |
| How long does it take for ABLT-1000 to the raised height? | Raised height with no load is 2.25 seconds. Lowered height with no load is 30.75 seconds Raised height loaded is 10.13 seconds Lowered height loaded is 12.6 seconds | ABLT-1000 |
| I'm interested in the IBC-TLT. Are the casters swivel? | The casters on the IBC-TLT are swivel with brakes. | IBC-TLT |
| What is the minimum amount of weight to "level" the tilt on the IBC-TLT? | The cart is level with 4,400 lbs. The tilt will reach 5 degrees when there is less than 150 lbs. on the cart. | IBC-TLT |
| Will the DCT-2000 work with a 30 gallon drum? | We offer an adapter for 30 gallon drums. The FDC-30 will work with the DCT-2000 to accommodate 30 gallon drums. | DCT-2000 |
| What are the dimensions of the "steps"? | The depth of the "step" is 5". The width of the "step" is 17 3/4". | SPA-2-2236, SPA-3-2236, SPS-2-2236, SPS-3-2236 |
| What is the length of the line on the portable cantilever hoist? | The line on the P-JIB-2 is 14' long. | P-JIB-2, P-JIB-4 |
| What are the dimensions of the caster mounting plate? | The caster mounting plate for the CART-400-LT is 4 3/8" x 4 3/8". | CART-400-LT |
| What metal are the anchor bolts ? | The anchor bolts are zinc plated steel. | AS-383, AS-383-4PK |
| What metal are the anchor bolts ? | The anchor bolts are zinc plated steel. | AS-344, AS-344-4PK |
| Does the drum retention basin have a drain plug? | No, there is no drum plug on the drum retention basin. | VSRB-YL-2, VSRB-YL-4 |
| Does the scale have multiple units of measure? | The scale on the SPT-2448-SCL, SPT-3060-SCL, SPT-3072-SCL can measure KG, G and LBS. Unit of measure in LBS extends to 4 places (i.e. .0001) | SPT-2448-SCL, SPT-3060-SCL, SPT-3072-SCL |
| Are the shelves removable and adjustable on the ROL-3143-2? | The bottom shelf on the ROL-3143-2 is fixed. Additional shelves can be purchased and mounted anywhere there are cross braces on the sides of the units. The additional shelf is ROL-3143-SLF. | ROL-3143-2 |
| How long does it take to assemble the storage unit? | Estimated assembly time for the Storage Building is 2.5 hours per unit with two people using simple hand tools. | STOR-96-G-W-1RH, STOR-912-G-W-1RH, |
| We are interested in the safety railings. Will we need the VDKR-CON to connect multiple rails? | The VDKR-CON can be used with some of the bases. Please note if you are using VDKR-P102, VDKR-W-102, VDKR-BASE, or VDKR-BASE-W the connectors (VDKR-CON) should be excluded. | VDKR-2,VDKR-3,VDKR-4,VDKR-5,VDKR-6,VDKR-7,VDKR-8,ADKR-2,ADKR-3,ADKR-4,ADKR-5,ADKR-6,ADKR-7,ADKR-8,VDKR-P102,VDKR-W-102,VDKR-BASE,VDKR-BASE-W |
| Can you tell me the dimensions of the openings of the grid? | The F-GRID openings are 3/8" x 3 1/2". | F-GRID |
| What is the thickness of the polyethylene on the fork blade protectors? | The polyethylene is .25" thick. | F4-36,F4-42,F4-48,F4-60,F5-36,F5-42,F5-48,F5-60, |
| We are going to do two "runs" on the pallet racking. How many uprights do we need? | For two continuous "runs" on the pallet racking you will need 3 frames (PRTD-XX-XX-XX) | PRTD-10-42-19,PRTD-10-42-24,PRTD-12-42-19,PRTD-12-42-24,PRTD-14-42-19,PRTD-14-42-24,PRTD-16-42-19,PRTD-16-42-24,PRTD-18-42-24 |
| What are the dimensions on the lifting hole at the top of the spreader beam? | The hole at the top of the SBRL-25 is 3" H x 2"W. | SBRL-25 |
| The shelves on this unit are adjustable. Can I add an additional shelf? | Yes. Additional shelves are available for the PCBS-1836 or the PCBS-2436. Please contact a sales associate for information. | PCBS-1836,PCBS-2436 |
| What is the locking capacity of the FL-LKH-8? | The locking capacity of the FL-LKH-8 is 2,000 lbs. | FL-LKH-8 |
| On the magnetic sweeper, how high is the eye hook on the ends of the sweeper? | The eyehook that the chain is attached to is 2 3/4" high. | HDFMS-36,HDFMS-48,HDFMS-60,HDFMS-72 |
| Can the JIB be used outside? | The VAN-J and the VAN-J-DC are powder-coat carbon steel, however the winch is not waterproof and cannot be used outside. | VAN-J, VAN-J-DC |
| Do you have a carpet pole diameter larger than 2 3/4"? | We do not have alternate carpet pole sizes. | CRP-108,CRP-120,CRP-144,CRF-108,CRF-120,CRF-144,CR-108-2,CRF-120-2,CR-144-2,CR-108-3,CR-120-3,CR-144-3 |
| Can the size of the self dumping hopper be modified? | We may be able to modify the width of the hopper. We are not able to modify the length. Please contact a sales associate for details. | D-25-LD,D-33-LD,D-50-LD,D-75-LD,D-100-LD,D-150-LD,D-200-LD,D-250-LD,D-300-LD,D-25-MD,D-33-MD,D-50-MD,D-75-MD,D-100-MD,D-150-MD,D-200-MD,D-250-MD,D-300-MD,D-25-HD,D-33-HD,D-50-HD,D-75-HD,D-100-HD,D-150-HD,D-200-HD,D-250-HD,D-300-HD,D-350-HD,D-400-HD |
| What does the "LD" mean on the hopper? | LD is "light duty" 12 gauge steel, 2,000 lb. capacity. MD is "medium duty" 10 gauge steel, 4,000 lb. capacity. HD is "heavy duty" 8 gauge steel , 6,000 lb. capacity. | D-25-LD,D-33-LD,D-50-LD,D-75-LD,D-100-LD,D-150-LD,D-200-LD,D-250-LD,D-300-LD,D-25-MD,D-33-MD,D-50-MD,D-75-MD,D-100-MD,D-150-MD,D-200-MD,D-250-MD,D-300-MD,D-25-HD,D-33-HD,D-50-HD,D-75-HD,D-100-HD,D-150-HD,D-200-HD,D-250-HD,D-300-HD,D-350-HD,D-400-HD |
| What does "MD" mean on the hopper? | LD (light duty) 12 gauge steel, 2,000 lb. capacity. MD (medium duty) 10 gauge steel, 4,000 lb. capacity. HD (heavy duty) 8 gauge steel, 6,000 lb. capacity. | H-25-LD,H-50-LD,H-100-LD,H-150-LD,H-25-MD,H-50-MD,H-100-MD,H-150-MD,H-25-HD,H-50-HD,H-100-HD,H-150-HD |
| At what point when the forks are raised does the overall height begin to increase? | When the forks are raised 1" the overall mast will increase by 1/2". Overall height is proportional with the fork height. | S-101-AA-DM |
| What is the lifting speed of the AT-10? | When the table is loaded at 200 lbs. the lifting speed is 13.31 seconds. The table unloaded lifting speed is 8.31 seconds. | AT-10 |
| Can this be used with plastic drums? | The shape of a plastic drum can be affected by temperature and weight. As a result, We don't recommend these drum cradles for use with plastic drums. | PRDC-36, PRDC-36-R, PRDC-42,PRDC-42-R |
| Can this warning bar ODG-133-BL be used outside? | The warning bar with warning siren and lights is not designed for use outdoors. | ODG-133-BL |
| Can these be used with skids and pallets? | The electric pallet truck with scale is designed for use with skids or open bottom pallets. There should be a minimum of 3 1/2" clearance. | EPT-2547-30-SCL, EPT-2748-45-SCL, EPT-2796-45-SCL |
| What type of plug does the on board charger come with? | The charger is a 3 prong plug. | PEL-88S-A1,PEL-88S-D3,PEL-88S-D3A1,PEL-100S-A1,PEL-100S-D3,PEL-100S-D3A1,PEL-400S-54-D3,PEL-400S-72-D3,PEL-88A-A1,PEL-88A-D3,PEL-100A-A1,PEL-100A-D3 |
| How fast does the platform raise and lower? | The MWP-30-DC has a lift speed of 30 seconds and 29 seconds to lower the platform. | MWP-330-DC |
| We have both steel and plastic drums. Is there a way we can use this with both types of drums? | Yes. FDA-550-DRUM-LRT-PF (installed in the factory) is an adaptor that can accommodate 55 gallon plastic and fiber drums. The adaptor can be easily removed for use with steel drums. | DRUM-LRT,DRUM-LRT-II,DRUM-LRT-DC,DRUM-LRT-DC-II,DRUM-LRT-AIR,DRUM-LRT-DC-SCL |
| Is the DCR-R-815-HC factory installed or can we add it later? | The DCR-R-815-HC can be retrofitted in the field or factory installed. | DCR-205-8,DCR-205-15,DCR-R-815-HC |
| I'm looking at the PM5-2748-TURN. How much space does this unit take for a 90 degree turn? | It is the total length of the jack. 61 11/16". | PM5-2748-TURN |
| What is the thickness of the steel for the guardrail post? | The steel thickness of the guardrail posts is 3/16". | GR-F2R-BO-TP18-YL,GR-F3R-DI-TP18-YL,GR-F2R-BO-TP42-YL,GR-F3R-DI-TP42-YL,GR-F2R-BO-TP60-YL,GR-F3R-DI-TP60-YL,GR-F2R-BO-TP72-YL,GR-F3R-DI-TP72-YL |
| What is the capacity of the railing? | The VDKR will support 200 lbs. of force in any direction. | VDKR-2,VDKR-3,VDKR-4,VDKR-5,VDKR-6,VDKR-7,VDKR-8,ADKR-2,ADKR-3,ADKR-4,ADKR-5,ADKR-6,ADKR-7,ADKR-8,VDKR-P102,VDKR-W-102,VDKR-BASE,VDKR-BASE-W |
| Can the uprights be attached to the I-Beam in multiple locations to adjust the usable width? | The vertical upright can be positioned inward on the I-Beam for a shorter usable width. | AHS-2-10-12, AHS-2-15,14,AHS-2-20-16, AHS-4-10-14, AHS-4-10-16, AHS-4-15-12, AHS-4-15-16,AHS-4-20-12, AHS-6-10-14, AHS-6-15-10, AHS-6-15-14,AHS-6-20-14, AHS-8-10-12, AHS-8-15-14, AHS-8-20-12, AHS-8-20-16, AHS-10-15-10 |
| Does the DRUM-LRT-DC-SCL work with both steel and fiber drums? | No. The DRUM-LRT-DC-SCL is recommended for use with 55 gallon steel drums only. | DRUM-LRT-DC-SCL |
| I'm comparing two pallet trucks with scales. They have the same fork size and same capacity. What is the difference between the PM-2748-SCL-LP and the PM-2748-SCL-LP-E? | The PM-2748-SCL-LP has articulating wheels and a Metler Toledo scale that has multiple programming functions. The PM-2748-SCL-LP-E has a basic scale. | PM-2748-SCL-LP, PM-2748-SCL-LP-E |
| How many pumps does it take for the pallet truck to get to the maximum raised height of 7 3/4"? | Each full pump raises the forks approximately 1". It would take approximately 8-10 pumps to reach the raised height of 7 3/4". | PM4-3348-RL,PM4-4048-RL,PM4-4548-RL |
| How thick are the "walls' on the HPRO-48-36-4? | The HPRO is made from ASTM-A-36 metal and has a wall thickness of .120". (We use 4" schedule-10 pipe to build these.) This is the same for all of our 4.5" diameter HPROs. | HPRO-36-24-4,HPRO-48-24-4,HPRO-36-36-4,HPRO-48-36-4,HPRO-36-42-4,HPRO-48-42-4,HPRO-60-42-4,HPRO-72-42-4 |
| What is the impact rating for the HPRO-48-36-4? | It is 4,000 lbs. force @ 4 MPH. This is the same for all of our 4.5" diameter HPROs. | HPRO-36-24-4,HPRO-48-24-4,HPRO-36-36-4,HPRO-48-36-4,HPRO-36-42-4,HPRO-48-42-4,HPRO-60-42-4,HPRO-72-42-4 |
| What is the thickness of the wall on the HPRO-36-24-2? | The walls are made from ASTM-A-36 metal and has a wall thickness of .109". This is the same for all of our 2" HPROs. | HPRO-36-24-2,HPRO-48-24-2,HPRO-36-36-2,HPRO-48-36-2,HPRO-36-42-2,HPRO-48-42-2 |
| What are the AMPS for the Edge O Dock Levelers? We need a 115V. | The PE Edge-O-Dock Levelers with a 115V use 12 AMPS. | PE-1572,PE-2066,PE-2072,PE-2566,PE-2572,PE-3066-PE-3072 |
| Does the L-220-DC-HD have a battery charge indicator on it? | The L-220-DC-HD and the L-270-DC-HD come standard with a battery charge indicator. | L-220-DC-HD, L-270-DC-HD |
| Are the EHLT scissor lift tables powder coated? | The Quick Ship (QS) tables have a powder coated deck. Some small bolt-on brackets are powder coated as well. The majority of the table is liquid painted. | EHLT-2448-3-43-QS,EHLT-3060-3-43-QS,ELT-4048-3-43-QS,EHLT-4848-3-43-QS,EHLT-4872-3-43-QS,EHLT-3060-4-43-QS,EHLT-4048-4-43-QS,EHLT-4848-4-43-QS,EHLT-4872-4-43-QS |
| We are interested in adding a top plate to the carousel. Is there an additional mounting fee? | There is no mounting fee when adding the base (CA-BASE) or top plate (CA-TP) to one of the carousels (CA). | CA-18-2,CA-24-2,CA-24-4,CA-30-2,CA-30-4,CA-36-2,CA-36-4,CA-40-2,CA-40-4,CA-40-6,CA-48-2,CA-48-4,CA-48-6,CA-60-2,CA-60-4,CA-60-6,CA-72-2,CA-72-4,CA-72-6 |
| What is the bolt hole pattern for the casters? | The pattern gets punched at the front and back of each fork tube for the casters. The hole diameter is 7/16". | D-25-LD,D-33-LD,D-50-LD,D-75-LD,D-100-LD,D-150-LD,D-200-LD,D-250-LD,D-300-LD,D-25-MD,D-33-MD,D-50-MD,D-75-MD,D-100-MD,D-150-MD,D-200-MD,D-250-MD,D-300-MD,D-25-HD,D-33-HD,D-50-HD,D-75-HD,D-100-HD,D-150-HD,D-200-HD,D-250-HD,D-300-HD,D-350-HD,D-400-HD |
| What are the size of the roller bearings on the carousel? | The roller bearings are outside diameter:40mm (~1 9/16"). The radial spacing of the bearings varies depending on the size and capacity of the carousel. | CA-18-2,CA-24-2,CA-24-4,CA-30-2,CA-30-4,CA-36-2,CA-36-4,CA-40-2,CA-40-4,CA-40-6,CA-48-2,CA-48-4,CA-48-6,CA-60-2,CA-60-4,CA-60-6,CA-72-2,CA-72-4,CA-72-6 |
| Does this electric pallet truck come with an onboard charger? | The EPT-2748-26 does not come with an onboard charger. | EPT-2748-26 |
| What are the dimensions on the base on the bollards? | The base on the PARK-P-60 is 5 3/8" diameter. The base on the PARK-P-76 is 6 1/2" diameter. The base on the PARK-P-108 is 8" diameter. | PARK-P-60,PARK-9-76,PARK-P-108 |
| What is the thickness of the steel on the EHLTG-4450-2-26? | The steel is 1/2" thick on the EHLTG tables. | EHLTG-3850-2-36,EHLTG-3850-4-36,EHLTG-4450-2-36,EHLTG-4450-4-36,EHLTG-5250-2-36,EHLTG-5250-4-36,EHLTG-4470-2-48,EHLTG-4470-4-48,EHLTG-2-48,EHLTG-5270-4-48 |
| Can the FDA-550-DRUM-LRT-PF be installed in the field? | Yes. FDA-550-DRUM-LRT-PF can be installed in the factory or the field. The adaptor can be easily removed for use with steel drums. | DRUM-LRT,DRUM-LRT-II,DRUM-LRT-DC,DRUM-LRT-DC-II,DRUM-LRT-AIR,DRUM-LRT-DC-SCL,FDA-550-DRUM-LRT-PF |
| Can you increase the crushing force of the drum crushers to more than 38,000 lbs.? | The HDC-905 units have a maximum crushing force of 38,000 lbs. | HDC-905-IDC/460V,HDC-905-HC/460V,HDC-905-IDC/230V,HDC-905-HC/230V,HDC-905-IDC/208V,HDC-905-HC/208V |
| We are mounting the EHLT in a pit. Are there lifting eyes to lower the table? | Lifting eyes are bolted through the top platform to lower the EHLT into a pit from overhead. Please contact a sales associate for details. | EHLT |
| What is the material the handle is made of? | The handle on the PPT is made of steel. | PPT-2-41,PPT-3-61 |
| Do the casters come assembled on the cart? | The handle and the casters must be assembled on the cart. | PPT-2-41,PPT-3-61 |
| What is the inside diameter of the 30 gallon drum? | The inside diameter of the 30 gallon drum measurers 18.25". | SD-30-OH-02,SD-30-OH-05,SD-30-OH-07,SD-30-TH-08,SD-30-TH-13 |
| What is the inside diameter of the 55 gallon drum? | The inside diameter of the 55 gallon drum measurers 22.50". | SD-55-OH-04,SD-55-OH-06,SD-55-OH-07,SD-55-OH-08,SD-55-TH-13,SD-55-TH-15,SD-55-TH-16 |
| Are these totes nestable for storage? | Once the tote (TDT) is assembled, they are not nestable. | TDT |
| How thick is the top plate on the lift? | The top plate of the MOTO-LIFT-1100 is 7/32". | MOTO-LIFT-1100 |
| What is the impact rating of the bollard? | The impact rating for the bollard is 4,000 lbs. force at 4 MPH | BOL-24-4.5,BOL-36-4.5,BOL-42-4.5,BOL-48-4.5,BOL-62-4.5,BOL-72-4.5 |
| What is the impact rating of the bollard? | The 5.5" bollard has an impact rating of 4,000 lbs. force at 4 MPH. | BOL-24-5.5,BOL-36-5.5,BOL-42-5.5,BOL-48-5.5,BOL-62-5.5,BOL-72-5.5 |
| What is the impact rating of the bollard? | The bollard has an impact rating of 4,000 lbs. of force at 4 MPH. | BOL-36-6.5,BOL-42-6.5,BOL-48-6.5,BOL-62-6.5,BOL-72-6.5,BOL-36-8.5,BOL-42-8.5,BOL-48-8.5 |
| What is the horizontal and vertical center of gravity for the work platform? | The horizontal center of gravity (HCG) and the vertical center of gravity (VCG) are the dimensions to the center of gravity which can be found on the approval drawing under the model details section of the website page. | WP-3636,WP-3648,WP-4848,WP-4848-FF,WP-3636-84B,WP-3648-84B,WP-4848-84B,WP-4848-84B,FF,WP-3636-DD,WP-3648-DD,WP-4848-DD,WP-4848-84B-DD-FF |
| What is the load center for the work platform? | The load center would roughly half of the platform length . Please refer to the approval drawing under the model details section of the website page. | WP-3636,WP-3648,WP-4848,WP-4848-FF,WP-3636-84B,WP-3648-84B,WP-4848-84B,WP-4848-84B,FF,WP-3636-DD,WP-3648-DD,WP-4848-DD,WP-4848-84B-DD-FF |
| What is the length of the battery life? | Under normal conditions the battery is expected to last approximately100 cycles. Recommended use on a flat surface. Battery life 7.5 hours for 1 cycle every 5 minutes. Battery life 15 hours for 1 cycle every 10 minutes. Battery life 22 hours for 1 cycle every 15 minutes. | TM-20-DC,TM-40-DC,TM-60-DC,TMS-20-DC,TMS-40-DC,TMS-60-DC |
| What is the dimension form the floor to the top of the handle? | It is 37" from the floor to the top of the handle. | CART-500-2033-FP |
| We are looking at the AHW-H-1936. What is the "thickness" of the step? | The material thickness of the step is 14 gauge. The height of the step channel is 1 1/2". | AHW |
| What type of paint is used on the racking? We'd like to use it outdoors | The powder used for the cantilever racking is not suitable for outdoor use. | SU, SDU, MU,MDU, HU,HDU |
| What type of paint is used on the racking? We'd like to use it outdoors | The powder used for the cantilever racking is not suitable for outdoor use. | HU,HDU,HB,HIA,HSA |
| What type of paint is used on the racking? We'd like to use it outdoors | The powder used for the cantilever racking is not suitable for outdoor use. | MU,MDU,MB,MIA,MSA |
| What type of paint is used on the racking? We'd like to use it outdoors. | The powder used for the cantilever racking is not suitable for outdoor use. | SU,SDU,SB,SIA, SSA |
| What is the belt length and width for model LTS-FTSB? | The belt extends to 4.5 feet and is 2" wide. | LTS-FTSB |
| What grade can the pallet truck be climbed with 2,000 lbs.? | The standard 2,000 lb. capacity unit will climb a 21% grade or a maximum of 12 degrees. | ALL-T-2-GPT, ALL-T-4-GPT |
| What angle is the boom when it is fully extended? | When fully extended the boom is at a 50 degree angle. | EPFC-CB-15 |
| What are the usable dimensions on the base of this cart? | The usable dimensions of the base of this cart are 12.5" x 44" | PRCT-S-MR |
| What is the clearance from the floor to the covering over the front casters? | The dimension is 1". | CBFC-500,CBFC-1000,CBFC-2000,CBFC-500-DC,CBFC-1000-DC,CBFC-2000-DC |
| Do you have to hold the button the entire cycle or can you press it and walk away? | This is hydraulic unit has a latching circuit that has an automatic operation after a single depression of the hand-held pendant. At the end of the cycle, the unit resets to the start position. To interrupt operation, depress the E-Stop button. | HDC-905-IDC/460V,HDC-905-HC/460V,HDC-905-IDC/230V,HDC-905-HC/230V,HDC-905-IDC/208V,HDC-905-HC/208V |
| Can work platforms be used with Telehandler? | For safety reasons, please DO NOT mount a work platform on a telehandler, aka boom lift, or rough terrain forklift, even if the handler will be used on level concrete or asphalt. | WP-3636,WP-3648,WP-4848,WP-3636-84B,WP-3648-84B,WP-4848-84B,WP-3636-DD,WP-3648-DD,WP-4848-DD,WP-3636-84B-DD,WP-3648-84B-DD,WP-4848-84B-DD |
| What is the minimum beam width/inside width when closed for model BT-20? | Inside width when closed is 2-9/16". | BT-20 |
| On the drawing for the S-118-AA-FR what does "UDL" stand for? | UDL stands for Uniform Distributed Load - even load across the forks. | S-118-AA-FR |
| Can I upgrade to AGM batteries? | Yes! Please ask for part # AGM-UPG-2-12V when placing your order for a new electric powered floor crane. | EPFC-CB-15,EPC-25,EPC-25-AA |
| What is the free lift on the counterbalanced stackers? | There is not a "free lift" on the counterbalanced stackers. It will lift at a 2:1 ratio. For every 2" the forks raise , the mast will raise 1". | S-CB-62,S-CB-118,S-2CB-62,S-2CB-118 |
| How many pumps to the raised height for CART-1000-D-FR? | Approximately 60-64 pumps to the raised height of 61 1/2". | CART-1000-D-FR |
| How long do the bristles last on this brush? | The life of the bristles on the brush depend on usage. Replacement brushes are available. | VSWP-48,VSWP-60,VSP-60,VSP-72 |
| I understand this is not waterproof, but will the pallet float? | The presswood pallet does not float. | PWP-4840 |
| Does this applicator use a standard aerosol can or the T-tip can? | The applicator uses a standard aerosol can. | LINE-SA, LINE-SA-W |
| How long is the strap on the CB-W-S-cylinder bracket? | The strap is 37" long. | CB-W-S |
| Can you attach a hose to this drum pump? | It is not recommended to attach a hose to the drum pump. | LDP-ST |
| What material is the pail opener? | The PAIL-PAL is Zinc. | PAIL-PAL |
| What is the load rating for the GWC-10? | The load rating is 10,000 lbs. | GWC-10 |
| Can the grid be cut to a different size? | No. The F-Grid is not made to be cut. | F-GRID |
| How long and how wide is the tape with this kit? | The tape is 4"wide and 6' long. | CS-AK-4 |
| Is there a temporary gate for this fence? | We do not have a gate for this barrier system. | HRAIL-9072 |
| Can the hoppers be used with a telehandler? | We do NOT recommend using the hopper with a telehandler. These hoppers are designed for use with powered fork lift trucks. | D-25-LD,D-33-LD,D-50-LD,D-75-LD,D-100-LD,D-150-LD,D-200-LD,D-250-LD,D-300-LD,D-25-MD,D-33-MD,D-50-MD,D-75-MD,D-100-MD,D-150-MD,D-200-MD,D-250-MD,D-300-MD,D-25-HD,D-33-HD,D-50-HD,D-75-HD,D-100-HD,D-150-HD,D-200-HD,D-250-HD,D-300-HD,D-350-HD,D-400-HD |
| Can the ALEXGATE be locked? | The gate cannot be locked, however there is a optional wall mount bracket. | ALEXGATE |
| What is the largest diameter the WALL-D can accommodate? | The largest diameter the WALL-D can handle is 3/16". | WALL-D |
| What size are the fork pockets? | The fork pockets are 8" wide. | SPC-3668-2L |
| What is the HP for these tables and how long does it take to raise and lower the table? | The 2HP table raises to 54" in 32 seconds and lowers in 18 seconds. | EHLTG-4484-3-54, EHLTG-5284-3-54 |
| Does this gate swing in both directions? | Yes, the gate swings in both directions. | VDKR-G3,VDKR-G4,VDKR-G3-B |
| What caster is the best? | The best "general" caster would be Polyurethane. It is durable, resistance to most chemicals and provides good floor preservation. | CST |
| Can the V-Block be used on the HYD-10? | The HYDC-VBLK accessory for the DC powered unit can be used on the manual units as well. | HYD-3,HYD-5,HYD-10,HYD-15,HYD-5-EP,HYD-10-EP,HYD-5-AS,HYD-10-AS,HYD-5-PSS,HD-5-AIR,HYD-10-AIR |
| Is the PAIL-PAL non-sparking? | The PAIL-PAL is not non-sparking. | PAIL-PAL |
| How should I install the EB-1? | There are no mounting holes on the EB-1. A variety of adhesives, or mounting hardware can be used. | EB-1 |
| What is the temperature rating for the floor lock? | The temperature rating is -30 to 120 degrees Fahrenheit. | FL-LKH-4,FL,LKH-5,FL-LKH-6,FL-LKH-8 |
| What is the thickness of the steel ? | The wall thickness of the bollard is 1/8". | BOLPP-24-4.5,BOLPP-24-5.5,BOL-24-6.5, BOLPP-36-4.5,BOLPP-36-5.5,BOLPP-36-6.5, BOLPP-42-4.5,BOLPP-42-5.5,BOLPP-42-6.5,BOLPP-48-4.5,BOLPP-48-5.5,BOLPP-48-6.5,BOLPP-62-4.5,BOLPP-62-5.5,BOLPP-62-6.5,BOLPP-72-4.5,BOLPP-72-5.5,BOLPP-72-6.5 |
| Does this product lock in both directions? | The handle is locked in both directions unless it is released. | WALL-D |
| What is the cycle time for the TCD-U-48-DC or the TCD-U-60-DC? | Speed is approximately 35 seconds to raise and 35 seconds to lower. | TCD-U-48-DC, TCD-U-60-DC |
| How long does it take to charge the battery for the TCD-U-48-DC or the TCD-U-60-DC? | It takes approximately 6-8 hours to charge the battery. | TCD-U-48-DC, TCD-U-60-DC |
| How long does the battery last on the TCD-U-48-DC or the TCD-U-60-DC? | Under normal conditions, the battery will last approximately 3.5 hours when raised every 5 minutes. The battery will last approximately 7.5 hours when raised every 10 minutes. | TCD-U-48-DC, TCD-U-60-DC |
| Can we use gel hand sanitizer with this unit? | The PHS-ALSD-01 dispenser is for liquid hand sanitizer only and holds 10.5 oz. | PHS-ALSD-01 |
| What grade can the ALL-T-1-GPT-ST-L climb when loaded? | The pallet truck will climb a 12 degree incline. | ALL-T-1-GPT-ST-L |
| What is the raise and lower time for HT-60-3248-DC? | The approximate raise time of the DC (battery powered) unit is 25 seconds. The unit lowers in approximately 8 seconds. | HT-60-3248-DC |
| What is the raise and lower time for HT-20-2436-DC? | The approximate raise time of the DC (battery powered) unit is 10.5 seconds. The unit lowers in approximately 4 seconds. | HT-20-2436-DC |
| What is the raise and lower time for HT-60-2436-DC? | The approximate raise time of the DC (battery powered) unit is 25 seconds. The unit lowers in approximately 8 seconds. | HT-60-2436-DC |
| What is the raise and lower time for HT-40-2436-DC? | The approximate raise time of the DC (battery powered) unit is 10.5 seconds. The unit lowers in approximately 4 seconds. | HT-40-2436-DC |
| What is the raise and lower time for HT-40-3248-DC? | The approximate raise time of the DC (battery powered) unit is 10.5 seconds. The unit lowers in approximately 4 seconds. | HT-40-3248-DC |
| What is the raise and lower time for HT-20-3036-DC? | The approximate raise time of the DC (battery powered) unit is 10.5 seconds. The unit lowers in approximately 4 seconds. | HT-20-3036-DC |
| Is everything on CART-600-D-SS2 stainless steel? | All parts are stainless steel except wheels. They wheels are polypropylene. | CART-600-D-SS2 |
| Does this scale read in 0.2 or 0.5 increments? | Yes it can read in both. | VLPFS-2,VLPFS-4A,VLPFS-4B,VLPFS-20 |
| Does this scale read in 0.2 or 0.5 increments? | The scale would automatically come calibrated in 1 lb. increments, but can be modified to 0.5 lb. increments. | SCALE-LP-44-5K,SCALE-LP-44-10K,SCALE-LP-44-20K |
| Does the DGL-LED-Y-AC come with a plug? | No it does not. The lights come with a short wire lead which you can wire to your own control box or add a plug. | DGL-LED-Y-AC |
| What is the usable width of the scissor dock lift? | The usable width on WL-100's can be calculated like this. For those with a removable handrail and FIXED toe board subtract 6" from overall width. For those lifts with a removable handrail and REMOVABLE toe board subtract 7-1/2" from overall width. | WL-100 |
| What is the height of the load guard back rest? | The load guard back rest is 30" high. | S-118-AA-FR |
| What caster should I purchase for the hopper? | The mold on rubber and poly on steel casters with their soft tread are quiet and ideal for uneven floors. The glass filled nylon casters provide a smoother roll. The semi-steel and ductile steel casters are the most durable. Your sales associate can help you match the capacity and size of the caster kits to your hopper. | D-25-LD,D-33-LD,D-50-LD,D-75-LD,D-100-LD,D-150-LD,D-200-LD,D-250-LD,D-300-LD,D-25-MD,D-33-MD,D-50-MD,D-75-MD,D-100-MD,D-150-MD,D-200-MD,D-250-MD,D-300-MD,D-25-HD,D-33-HD,D-50-HD,D-75-HD,D-100-HD,D-150-HD,D-200-HD,D-250-HD,D-300-HD,D-350-HD,D-400-HD |
| Which caster should I purchase for my hopper? | The mold on rubber and poly on steel casters with their soft tread are quiet and ideal for uneven floors. The glass filled nylon casters provide a smoother roll. The semi-steel and ductile steel casters are the most durable. Your sales associate can help you match the capacity and size of the caster kits to your hopper. | H-25-LD,H-50-LD,H-100-LD,H-150-LD,H-25-MD,H-50-MD,H-100-MD,H-150-MD,H-25-HD,H-50-HD,H-100-HD,H-150-HD |
| Which caster should I use with the hopper? | The mold on rubber and poly on steel casters with their soft tread are quiet and ideal for uneven floors. The glass filled nylon casters provide a smoother roll. The semi-steel and ductile steel casters are the most durable. Your sales associate can help you match the capacity and size of the caster kits to your hopper. | H-CK3-SC6-2,H-CK3-MR6-2,H-CK3-PU6-2,H-CK3-GFN6-2,H-CK3-SC6-2HD,H-CK4-SC6-2,H-CK4-MR6-2,H-CK4-PU6-2,H-CK4-GFN-2,H-CK4-SC6-2HD,D-CK4-SC6-2,D-CK4-SC8-2,D-CK4-MR6-2.D-CK4-MR8-2,D-CK4-PU6-2,D-CK4-PU8-2,D-CK4-GFN6-2,D-CK4-GFN8-2,D-CK4-SC6-2HD |
| What is the platform made of? What is the capacity and thickness ? | The platform is made of chromed steel. Thickness is Gauge 9 with 770 lbs. capacity. | VWS-DK |
| What is the diameter of the base and the top pad for MSJ-10? | The diameter of the base is 4-5/16". The diameter of the top pad is 2-3/8". | MSJ-10 |
| What is the diameter of the base and the top pad for MSJ-20? | The diameter of the base is 4-7/8". The diameter of the top pad is 2-11/16". | MSJ-20 |
| What is the diameter of the base and the top pad for MSJ-3? | The diameter of the base is 3-11/16". The diameter of the top pad is 1-7/8". | MSJ-3 |
| What is the diameter of the base and the top pad for MSJ-5? | The diameter of the base is 4-1/8". The diameter of the top pad is 2". | MSJ-5 |
| Does this stretch wrap machine have fork pockets so it can be moved? | Yes, the SWA-54 and the SWA-60 have fork pockets. | SWA-54,SWA-60 |
| Does this stretch wrap machine have fork pockets so it can be moved? | No it does not. Please see the SWA-54 and the SWA-60 that include fork pockets. | SWA-50,SWA-70 |
| We are looking at the extra platform for the HYD-5-LP. How high is the lip on the platform? | The HYD-5-LP platform lip is 3-1/8" high. The HYD-5-EP platform lip is 5-1/8". | HYD-5-LP ,HYD-5-EP |
| Is the drum crusher spark resistant? | No, the HDC units are not spark resistant. | HDC-905-IDC/460V,HDC-905-HC/460V,HDC-905-IDC/230V,HDC-905-HC/230V,HDC-905-IDC/208V,HDC-905-HC/208V |
| Is the drum crusher explosive proof? | No, the HDC units are not explosive proof. | HDC-905-IDC/460V,HDC-905-HC/460V,HDC-905-IDC/230V,HDC-905-HC/230V,HDC-905-IDC/208V,HDC-905-HC/208V |
| What is the capacity of the lifting lugs? | The capacity of the lifting lug is compatible with the capacity of the hopper. | D-25-LD,D-33-LD,D-50-LD,D-75-LD,D-100-LD,D-150-LD,D-200-LD,D-250-LD,D-300-LD,D-25-MD,D-33-MD,D-50-MD,D-75-MD,D-100-MD,D-150-MD,D-200-MD,D-250-MD,D-300-MD,D-25-HD,D-33-HD,D-50-HD,D-75-HD,D-100-HD,D-150-HD,D-200-HD,D-250-HD,D-300-HD,D-350-HD,D-400-HD |
| What is the capacity of the lifting lugs? | The capacity of the lifting lugs is compatible with the capacity of the hopper. | H-25-LD,H-50-LD,H-100-LD,H-150-LD,H-25-MD,H-50-MD,H-100-MD,H-150-MD,H-25-HD,H-50-HD,H-100-HD,H-150-HD |
| How much space is there between the front wheels of model CART-600-D-FR? | The space between the front wheels is 20". | CART-600-D-FR |
| I am looking for the dimensions of the adjustable legs. I want to be sure it can straddle a pallet. | The inside dimensions of the adjustable legs are 40"-50". | S-101-AA-DM |
| What are the specs for the mounting holes of the HWG-600? | The hole pattern is 8" apart center of hole to center of hole X 5-3/4" apart center of hole to center of hole. The holes are 1/2" diameter. | HWG-600 |
| What is the turn radius for the pallet jack? | The turn radius for the PM2-2748-Y is 200 degrees. | PM5-2748-Y |
| What is the inside diameter of the base tube on the HRAIL-BASE? | The inside diameter of the HRAIL-BASE is 15/16". The outside diameter is 1.10". | HRAIL-BASE |
| What grade is the steel? | The VDKR steel is Grade B. | VDKR-2,VDKR-3,VDKR-4,VDKR-5,VDKR-6,VDKR-7,VDKR-8,ADKR-2,ADKR-3,ADKR-4,ADKR-5,ADKR-6,ADKR-7,ADKR-8,VDKR-P102,VDKR-W-102,VDKR-BASE,VDKR-BASE-W |
| What is the distance from the floor to the fork? | The lowered height from the top of the fork to the floor is 2". The raised height from the top of the fork to the floor is 118". The 3.3" is the height of the outrigger. | S-118-AA-FR |
| What is the approximate speed this foot pump table rises? | Two speed auto shifting manual foot pump Number of pumps to raise table: Low Pressure: 20 High Pressure: 56 | CART-2000-3240-FP |
| Are the casters on the dolly grounded static? | No there are not grounded or anti-static. | DRUM-SS-55-H |
| What is the diameter of the "Pole". | The diameter of the pole is 3-1/2". | VAN-J, VAN-J-DC |
| Is this pallet rust resistant? | Yes the pallet is rust resistant. | SPL-3636,SPL-4048,SPL-4248,SPL-4848 |
| What is the capacity, as well as the force required to engage them? | Locking capacity is 1,200 lbs. Force required to engage the brake: 20 - 30 lbs. | FL-LK-7X |
| Is this designed to operate without being bolted down? | Yes the drum crusher can be used without being bolted down. There are fork pockets so the drum crusher can be moved. Please see the owners manual for additional information. | HDC-905-IDC/460V,HDC-905-HC/460V,HDC-905-IDC/230V,HDC-905-HC/230V,HDC-905-IDC/208V,HDC-905-HC/208V |
| What should be used for the ballast? | Our removable ballast weight is available. Or sand, scrap steel or bags of quikrete would be adequate for use with the JIB. | P-JIB-2, P-JIB-4 |
| Is there a high cycle option for the HDC-900-GPT? | The standard unit comes as a high cycle unit from the factory. | HDC-900-GPT |
| What size carabineer do I need for the TBR-5 counterbalance? I will be connecting it to my ergo arm/trolley. | The zinc plated steel safety latch for tool attachment measures 2.375"(60mm) long. | TBR-5 |
| What is the gauge of steel of this product? | The PRAIL is 14 gauge steel. | PRAIL-102-HD-G, PRAIL-102-HD-G-WW,PRAIL-102-HD-G-FF,PRAIL-102-HD-G-WF,PRAIL-102-HD-G-W |
| Are these carts ESD safe? | No the carts are not ESD (electrostatic discharge) safe. | CART-750-TS, CART-1500-D-TS |
| What is the spacing in between the mounting holes? | The spacing in between the mounting holes is 21-1/4". | SBA-48 |
| Can the DCBB-B-KIT work with the pour in place bollards (BOLPP series)? | Yes the chain kit for the bollards can be used with BOLPP products. | DCBB-B-KIT |
| Can the DCBB-B-KIT work with the pour in place bollards (BOLPP series)? | Yes the chain kit for the bollards can be used with BOLPP products. | BOLPP-24-4.5,BOLPP-36-4.5,BOLPP-42-4.5,BOLPP-48-4.5,BOLPP-62-4.5,BOLPP-72-4.5,BOLPP-24-5.5,BOLPP-36-5.5,BOLPP-42-5.5,BOLPP-48-5.5,BOLPP-62-5.5,BOLPP-72-5.5,BOLPP-24-6.5,BOLPP-36-6.5,BOLPP-42-6.5,BOLPP-48-6.5,BOLPP-62-6.5,BOLPP-72-6.5 |
| I have to raise the forks up 68" on the SNM-90-FF-27. How high will the mast be at that point? | If the forks are at 68", the mast will be at 98" high. | SNM-90-FF-27 |
| Will the DFT-ADJ be safe to use with 99% isopropyl alcohol? | Yes, we can recommend this drum faucet for use with 99% isopropyl alcohol. | DFT-ADJ |
| What wiring is required to install the scissor dock lift? | Five minimum 18 AWG wires (or an appropriate hard service cable) are required between the power unit's control enclosure and the lift's frame. These wires, the power unit's disconnect, and the branch circuit overcurrent and short-circuit protection are the responsibility of the installer or building owner. Please see the owner's manual in the PDF section. | WL-100 |
| Is the hardware for the cantilever racking metric? | Yes, the hardware for the cantilever racking is metric. | HU-C, HDU-C,HB-C,HSA-C,HIA-C |
| Is the hardware for the cantilever racking metric? | Yes, the hardware for the cantilever racking is metric. | SU-C, SDU-C,SB-C,SSA-C,SIA-C |
| Is the hardware for the cantilever racking metric? | Yes, the hardware for the cantilever racking is metric. | MU-C, MDU-C, MB-C,MSA-C,MIA-C |
| I want to install the wire mesh on the square railing. What hardware is needed? | The hardware for the wire mesh to install on the square railing is included. | WM-48,WM-60,WM-72,WM-84,WM-96,WM-108-WM-120 |
| Is the BASE-4848 able to stack with the NEST-F-4848? | Yes. Both the BASE-4848 and the NEST-F-4848 are internestable and stackable. | BASE-4848,BASE-6048 |
| I want to stack BASE-4848 with the NEST-F-4848. Can I stack 3 levels? | The BASE-4848 and the NEST-F-4848 are internestable and stackable - 2 units high. For stacking more than 2 units high, please see NEST-106,NEST-210,NEST215 or NEST-230. | BASE-4848,BASE-6048 |
| This US made drum cover specifies a 25" diameter. Can you verify if this is OD or ID with or without ring closure? | The inside diameter including the area that covers bolt/closure measures 24.5". The overall lid/ die cut including the overhang measures 25". | DC-TPO, DC-TPO-B |
| What kind of casters come on the back of the VWS-770-FF? | It comes with (1) swivel caster and (1) swivel with brake caster. | VWS-770-FF |
| Does the CART-24-10-DC have a battery charge indicator? | The BCI (battery charge indicator) is included with the DC powered carts. | CART |
| I am interested in the STAND-H - do these ship with the hex wrench included? | Yes the hex wrench is included. | STAND-H |
| How do I adjust the outriggers to sit level? | The outriggers are adjustable. To move the outriggers, tighten the bolts on the legs . Start by loosening them all and the unit will sit level. Tighten the bolts just until they start to touch the outrigger frame. If needed, adjust the legs to level it, by tightening the top bolts on the leg opposite of the wheel needing lowered. | VHPS-2000-AA-17,VHPS-2000-AA-35,VHPS-2000-AA-118, VHPS-3000-AA-17,VHPS-NM-1000-AA |
| What is the run time for the pallet jack? How long should a pallet jack battery be charged for without causing damage? | Run time depends on the load being lifted but approximately 3-6 hours intermittently. Battery charger will turn off and on automatically as to avoid over charging. | L-220-DC-HD |
| What type of I-Beam is used on the AHS? | W Beams are used on the adjustable height steel gantry cranes. | AHS-2-10-12, AHS-2-15,14,AHS-2-20-16, AHS-4-10-14, AHS-4-10-16, AHS-4-15-12, AHS-4-15-16,AHS-4-20-12, AHS-6-10-14, AHS-6-15-10, AHS-6-15-14,AHS-6-20-14, AHS-8-10-12, AHS-8-15-14, AHS-8-20-12, AHS-8-20-16, AHS-10-15-10 |
| What is the height of the lip? | Lip height is 3-1/8" usable height. | MIA,MSA |
| What is the lip height for HSA? | The lip height is 3-1/8" usable height. | HSA |
| What is the lip height for XHDSA and HDSA? | The lip height is 3-1/8" usable height | XHDSA, HDSA |
| Can I use the PRDC-42 on my 48" wide pallet rack? | :No, it will not work on a 48" wide rack. You will have to switch out your current pallet racking for the 42" wide pallet racks. | PRDC-42 |
| How do you move the Heavy-Duty Cradle Carts (DCC) around? | These units are designed to be pushed as there is NOT a handle or a tow bar to pull it with. | DCC-80,DCC-2860-4,DCC-2896-4,DCC-2860-10,DCC-2896-10,DCC-28120-10 |
| Are the DCCs hard to push around with a full load? How much force do I need to move them at capacity? | START PUSHING 4,000 LBS UNITS: LOAD: 30-40 LBS. pressure START PUSHING 10,000 LBS. LOAD: 75-100 LBS. pressure | DCC-80,DCC-2860-4,DCC-2896-4,DCC-2860-10,DCC-2896-10,DCC-28120-10 |
| when the drum is in the cradle, does it extends farther than the legs when they are completely open? | A standard 55 gallon steel drum (22-1/2" diameter) would overhang the front casters of the DCR-880-H unit slightly ( roughly 4-1/2") when the legs are in the outermost position. It is not recommended to transport the drum with the legs in this position. We would recommend to pick the drum from the pallet with the legs in that position, then move the unit and drum away from the pallet enough to clear the legs, then lower the drum to the ground, adjust the legs back to the inner most position , raise the drum slightly and secure it to the lower saddle using the supplied ratchet strap, before transporting the drum. | DCR-880-H |
| Is there a release lever on the sweeper? | No there is not a release lever on the magnetic sweeper. | HDMS-36,HDMS-48,HDMS-60,HDMS-72 |
| How high does the unit raise per crank? | Approximately 1-1/8" per rotation | LLW-PAILD-100,LLW-PAILD-200 |
| How long does it take to get a full charge from a dead battery on table? | Allow 8 hours to charge a dead battery. | PST |
| How many cycles per full battery? | Here are the approximate cycles for the portable scissor lift table. 1 cycle every 5.72 minutes for 7.5 hours. 1 cycle every 11.44 minutes for 15 hours. 1 cycle every 17.16 minutes for 22.5 hours. | PST |
| Are the HCR series ADA compliant? | No they are not ADA compliant. | HCR |
| What size are the tube leg members for EHN-40-C? | The tube leg members are 2-3/4". | EHN-40-C |
| What is the wall thickness of the tubes? | The wall thickness of the tubes is 1/8". | EHN-40-C |
| What is the fork pocket size of this hopper? | The fork openings are: 2.5" high x 14" wide x 48" length under the base. | HOP-150-LD |
| Does the trash compactor work with a fiber drum? | The fiber drum should work as long as the 21" diameter compacting plate fits. | MTC-55 |
| What is the magnetic pull on the Magnetic Push Sweepers? | The magnetic pull is 40 pounds. | MFSR,MPSR |
| Will the MWP-SPIN work with the MWP-550? | Yes, the MWP-550-DC & MWP-SPIN will work together. | MWP |
| What is the incline degree that these units will climb? | These units will climb 6 degrees without load, 3 degrees with load. | RT-EPT-3-48,RT-EPT-3-24 |
| How much hydraulic fluid do these units hold? | The Hefti-Lifts hold 2-2.5 quarts of hydraulic fluid. | HYD-3,HYD-5,HYD-10,HYD-15 |
| Are these bollards with strobe and beeper suitable for outdoor applications? | We do not recommend using these bollards outdoors. | SPBOL-42-BL |
| What is the spacing of the mesh backing on the PMC-VHPS-2000-AA? | The spacing of the mesh backing is 3/8"H x 3-3/8"W. | PMC-VHPS-2000-AA |
| What is the service range of the ball hitches? | The service range of the E-TUG-SABH is 14-15/16 to 23-5/8. The service range of the E-TUG-ABMH is 15-1/2 to 21-1/2. | E-TUG-ABMH, E-TUG-SABH |
| Is the Vestil VB 12 made of high density polyethylene or low density polyethylene? | The VB series are made of MDPE - Medium-density polyethylene. | VB-6,VB-8,VB-10,VB-12,VB-8-10,VB-9R |
| What is the width of just the hoist? I can only find the width of the entire unit. | The width of the hoist is 5-3/8". | LOW-1P |
| What is the turning radius on the fixed fork stacker? | The turning radius of the SE/HP-118 is 47-1/4". | SE/HP-118 |
| We are looking at the full featured work platform. How does the emergency stop button work? | The Emergency Stop Button Kit allows the operator to shut off fork truck power from the work platform. It works with both gas and electric fork trucks | WP-4848-FF, WP-4848-DD-FF,WP-4848-84B-FF,WP-4848-84B-DD-FF |
| How many pumps does it take to extend the boom? | It is approximately 30 pumps to extend the boom. | CBFC-2000 |
| Can this be used on an incline / grade? | We recommend these for use on a flat and level surface only. We don't have any sort of incline use information for this unit for liability reasons. | PTM-GPT |
| What is the service range on our CART-400-LP? | The service range of CART-400-LP is 3-1/2 to 24 inches. | CART-400-LP |
| Do these stackers have a FREE LIFT (the forks are raised higher than the mast)? | We currently do not have a stacker in our product inventory with a free lift. | S-62-FA,S-62-AA,S-118-AA,S-150-AA,S-62-FF,S-118-FF |
| What is the steer arch? | The steer arch of the PM-2146-TL-SCL-LP is 180 degrees. | PM-2146-TL-SCL-LP |
| What is the recommended PSI of the tires on the ALL-T-2-48? | It is marked on the side of the tires themselves. 36 PSI for the large tires and 30 PSI for the steer tires. | ALL-T-2-48 |
| What size padlock will work with the tool box for APTS? | The tool boxes accept a 3/8" padlock. | APTS |
| Is this jack used to support a space after it has been lifted? | These jacks are not meant to be used to lift. Only to hold the load in place. | FJB-16,FJB-36,FJB-100,FJB-150 |
| How long does it take to raise the cart? | It takes approximately 36 seconds to raise the Air-800-D cart to 51". | AIR-800-D |
| The outside diameter of the adjustable legs is 54 1/8". What is the minimum width? | Minimum width of the adjustable legs is 43". | SLNM-63-AA |
| Will these plastic pallets hold up in a cold application? | The PLP2-4840 will work fine for storage temperatures of 32 - 34 degrees Fahrenheit. | PLP2-4840 |
| Are these pallets made with recycled plastic? | The PLP2-4840-BLUE and the PLP2-4840-BLACK are both made from virgin material. | PLP2-4840-BLUE, PLP2-4840-BLACK |
| What is the diameter of the extended arms? | They are 1-1/2". | VBR-9 |
| What is the maximum ramp angle on the SNM-62-FA? | This unit has a 0 degree incline. | SNM-62-FA |
| What is the purpose of the black box on the handle? | The handle part comes off and the cart can be attached to a lawn tractor. | LSC-2448-4SD |
| What is the purpose of the FMDL roller and belt units? | The roller and belt units create a softer surface when picking up drums. These units are ideal for drums that could potentially become scratched while moving the drum. | FMDL-1-LDS-R3,FMDL-2-LDS-R3,FMDL-1-LDS,B1,FMDL-2-LDS,B1 |
| What is the tubing for the SUPPORT POLE/SQUARE of the MINI-2? 5/8" or 1-5/8" for this hoist? | The measurement of the collar on the MINI-2 is 1-7/8" wide X 1-1/2" high. | MINI-2 |
| What kind of batteries do the PELs use? Can they be shipped UPS? | The batteries for the PEL88, 100, 88A, 100A are 12 volt, 12 amp hour, AGM (absorbed glass matt) and are maintenance free, and can ship UPS. The batteries for the PEL400 are 12 volt, 33 amp hour, AGM (absorbed glass matt) and are maintenance free, and ship UPS. Two batteries per unit, wired in series. | PEL-88S-A1,PEL-88S-D3,PEL-88S-D3A1,PEL-100S-A1,PEL-100S-D3,PEL-100S-D3A1,PEL-400S-54-D3,PEL-400S-72-D3,PEL-88A-A1,PEL-88A-D3,PEL-100A-A1,PEL-100A-D3 |
| What is the casters are good for rough or uneven terrain? | The CST-VE-FF SERIES are good for rough or uneven terrain. | CST-VE-FF SERIES |
| What casters are good for rough or uneven terrain? | The CST-VE-FF SERIES are good for rough or uneven terrain. | CST-VE-FF SERIES |
| What is the best economical caster? | The CST-E6 series is the best economical caster. | CST-E6 |
| What is the best economical caster? | The CST-E6 series is the best economical caster. | CST-E6 |
| What casters do best in environments with debris? | The F34 series, the F40 series, the FC47 series or the JKING series do well in environments with debris. | CST-E6 |
| What casters do best in environments with debris? | The F34 series with SI tread, the F40 series, the FC47 series or the JKING series do well in environments with debris. | CST-E6 |
| Model VB-8-10 - What are the outside dimensions? | The outside dimensions are 24" x 24" x 40" H. | VB-8-10 |
| What size hex socket is required to adjust the outriggers on model SE/HP-63-AA? | The stacker can be adjusted with a 12mm hex socket. | SE/HP-63-AA |
| Is the scale suitable for wash-down? And can it measure as little as 1/2 lb.? | Yes, the scale is suitable for a wash-down environment and it can measure as little as 1/2 lb. | DRUM-SCLG, DRUM-55FP |
| What type of coating is on the chain ? | The color on the chain is powder coated. | CHAIN-316-PF |
| Are the pallets PBDE free? | Yes these plastic pallets are PBDE free(the pallets are 100% virgin HDPE material). | PLP2-4840 |
| Can I use the DGD-55-D on one just one drum? | Yes, this product will still work with one drum, or with two drums. | DGD-55-D |
| Is the conveyor able to make a 90 degree turn? What is the turning radius? | The conveyor is able to make 90 degree turn. The turning radius is around 1m. | EXCNV-S-24-24 |
| Are the rims on the hand truck steel? | The rims on the DHHT series are steel for those with pneumatic wheels and plastic for hard rubber wheels. | DHHT |
| What is the capacity of the floor lock? | the FL-ADJ floor locks have a locking capacity of 2,000 lbs. | FL-ADJ |
| How many square feet is the storage building? | The STOR-96-G-W-1RH shed is 6' x 9' = 54 square feet. | STOR-96-G-W-1RH |
| What is the size of opening of the hook? | The hook opening measurers 7/8". | LM-HP4-S |
| How thick should my dock seal be? | Your dock seal depth is determined by the slope of your approach and the dock bumper thickness. Level approaches typically have 4.5" thick dock bumpers and a 9"-10" thick seal. When installed, your dock seal should extend 4"-5" past the face of your dock bumpers so that there is 4"-5" of pad compression when a truck is docked. An inclined or declined approach will require sloped side pads to compensate for the approach angle. A survey sheet is required to determine the proper pad slope. | D-150-10,D-150-11,D-150-12,D-150-13,D-150-14-D-150-15,D-150-16,D-150-17,D-150-18,D-150-19,D-150-20 |
| What dock seal do I need? | Loading docks are not all the same bumper projection, dock height, approach, door opening size, wall construction, access required to the rear of the trailer, trailer sizes being service as well as several other questions are key factors when designing a dock. For this reason there is no simple answer to this question. On our site there are several tools to help. You can call us during business hours, fill out an RFQ, or submit the dock seal survey on the dock seal page and we will help you with a dock seal fit to match your needs. | D-150-10,D-150-11,D-150-12,D-150-13,D-150-14-D-150-15,D-150-16,D-150-17,D-150-18,D-150-19,D-150-20 |
| Why is the dock seal top head pad getting damaged? | If your top pad is receiving more damage than other parts of your seal there are several reasons it could be happening. The most common reason for this is a sloped approach. When the dock slopes down and the dock bumpers are not thick enough the truck will hit the wall or over compress the top of the seal causing it to wear out early. The way to avoid this situation is a wedged seal with adequate dock bumper projection. | D-150-10,D-150-11,D-150-12,D-150-13,D-150-14-D-150-15,D-150-16,D-150-17,D-150-18,D-150-19,D-150-20 |
| How do we install a dock seal? | Installing a dock seal is simple and can be performed with basic tools. Comprising of flat and angle brackets installation is simple and can be performed in an hour or two depending on experience. For installation instructions email us at info@vestil.com | D-150-10,D-150-11,D-150-12,D-150-13,D-150-14-D-150-15,D-150-16,D-150-17,D-150-18,D-150-19,D-150-20 |
| Where can we buy a loading dock door wrap around seal? | There are many terms used in the door industry to describe what we call dock seals; we often hear them called dock wrap around, dock bumper cushions, door pads, docking pads, etc. Vestil Manufacturing, experts in this field, offer a full range of dock seals, truck shelters, and other dock equipment with same day quotes most handled on the phone. | D-150-10,D-150-11,D-150-12,D-150-13,D-150-14-D-150-15,D-150-16,D-150-17,D-150-18,D-150-19,D-150-20 |
| What is the difference between a Dock Seal Vs. a Truck Shelter? | A dock seal is traditionally designed to enclose a loading dock reducing its width to an optimal 7'6", while a truck shelter is designed to allow full access to the trailer without restricting the available space around the door. Truck shelters typically afford service to a wider range of trucks than a dock seal as well, due to the nature of the seal. When a vehicle docks with a shelter the curtains with spring steel stays slide along the side of the vehicle rather than compress like a dock seal. | D-150-10,D-150-11,D-150-12,D-150-13,D-150-14-D-150-15,D-150-16,D-150-17,D-150-18,D-150-19,D-150-20 |
| What is the difference between a Dock Seal Vs. a Truck Shelter? | A dock seal is traditionally designed to enclose a loading dock reducing its width to an optimal 7'6", while a truck shelter is designed to allow full access to the trailer without restricting the available space around the door. Truck shelters typically afford service to a wider range of trucks than a dock seal as well, due to the nature of the seal. When a vehicle docks with a shelter the curtains with spring steel stays slide along the side of the vehicle rather than compress like a dock seal. | D-750-18,D-750-24,D-750-30,D-750-36 |
| What is the closed and fully extended length of the TAM-30? | The closed dimension is 28-1/2", the extended is 45-1/2" . | TAM-30 |
| On your SSA step stools, what is the diameter of the legs? | The legs are 3/4" schedule 40 aluminum pipe. | SSA |
| What is the distance from the end of the fork to the front roller? | The distance from the end of the fork to the front roller is 8". | PM2-3344-SLP |
| I see the pole diameter is 2 3/4". Is that a solid pole or hollow? | The carpet pole/rug rams poles are solid. | CR, CRF, CRP |
| What gauge is the steel on the bottom panel of the cart? | The steel on the bottom panel is 9 gauge. | PRCT-S-MR |
| Will this travel in sand on the beach? | No, this will not travel in sand. | OROAD-400 |
| What are the dimensions of the arm where they attached to the upright for SSA-C-18? | The arm bracket is 7-1/4" wide and the opening is 2-1/4" where it attaches to the upright. | SSA-C-18 |
| What are the 2 pump measurements for each of the 2 speeds of pumps for the CART-800-D-TS? | High: 2-5/8" per stroke and Low: 3/4" per stroke. | CART-800-D-TS |
| How does the onboard charging system work on the CBFC-1000-DC? | Customer uses their own extension cord to charge. One end plugs into the power unit and the other end plugs into the wall. | CBFC-500-DC, CBFC-1000-DC, CBFC-2000-DC |
| What is the crank radius of the handle when turning on the MT mechanical post tables? | The crank radius is 8-3/8". | MT |
| Are there fork options for the stacker? | We offer three options. RT- EPT-DBH double ball hitch, RT-EPT-MLH manual lock hitch, and the RT-EPT-SDG single drum gripper. | RT-S-62-AF |
| Are the forks removable? | Yes, the forks on the RT-S-62-AF are removable. | RT-S-62-AF |
| Is this light weatherproof for use outside? | They heavy duty loading dock light is not intended for use outdoors and is not weatherproof. | LL-HD-LED-24,LL-HD-LED-40,LL-HD-LED-60,LL-HD-LED-90 |
| I am looking at the SPT-3672. What is the mounting hole pattern and bracket size of the default casters? | The SPT utilizes a bull dog caster plate. It will accept caster pads that are 4" w x 4-1/2" lg x 3/16" thick. | SPT |
| Is the entire unit plastic including the yellow handle and frame? | The blue deck and wheels are plastic. The yellow handle and frame are steel. | PDH-1624 |
| What is the cycle time to tip and return, please? | Full cycle empty: 13 seconds. Full cycle loaded: 35 seconds. | CTD-H-TP-3000 |
| What is the capacity of the FAB-11-ERGO? | FAB-11 can hold a truck which weighs 40 tons. | FAB-11-ERGO |
| What is the size of the nose plate? | The nose plate of the PDSC-350-62 is 11" x 17". | PDSC-350-62 |
| What is the voltage of the hoist? | The hoists are 115V single phase power. | MINI-2,MINI-4,MINI-7,MINI-10 |
| What material are the wheels? | The wheels are Polyurethane. | EPT-SF-1232-26 |
| What is the fork size? | The fork size is 12" x 32" for the EPT-SF-1232-26. | EPT-SF-1232-26 |
| Are there leveling feet on the scale? | The scale does have adjustable leveling feet. | SWA-48-SCALE |
| What is the capacity rating on the FL-LK-SMR-L and the FL-LK-SMR-R ? | The locking capacity is 2,000 lbs. | FL-LK-SMR-L,FL-LK,SMR-R |
| What is the raise time on the MWP-500-DC? | The raised time is 38 seconds. | MWP-500-DC |
| What size are the 2 large wheels on these totes? | The LD units are 10" wheels. The MD and HD models have 12" wheels. | TDT |
| What is the capacity of the HYDC-SPIN? | The HYDC-SPIN capacity is 400 lbs. | HYDC |
| What are the hand chain and load chain made of? | The load chain is alloy steel. The hand chain is carbon steel galvanized. | LOW-1G,LOW-1P,LOW-2G,LOW-2P,LOW-4G,LOW-4P,LOW-6G,LOW-6P |
| Can I add a shelf to this racking? | Yes, the (VRSOR-SLF) shelf can be added to the VRSOR-120 or the VRSOR-60. | VRSOR |
| What is the life cycle of spring on the E-TUG-HD-SLH? | The life cycle of spring for moderate use is approximately 1 to 2 years. | E-TUG-10, E-TUG-20, E-TUG-30 |
| Is the orientation of the hitch E-TUG-HD-SLH relevant? | Yes. The hitch is designed for horizontal pulling only. | E-TUG-10, E-TUG-20, E-TUG-30 |
| What is the life cycle of the hitch E-TUG-HD-SLH ? | The life cycle of the hitch is approximately one year with moderate use. | E-TUG-10, E-TUG-20, E-TUG-30 |
| What size diameter can this gripper lift? | The gripper can accommodate 16"-30" rolls (outside diameter). | S-MU-VRGR-72 |
| Are the forks adjustable on the HYD-10-DC? | Yes, when the forks are extended, overall fork width is 21-5/8", and when forks are retracted the overall fork width is 9". | HYD-10-DC |
| What is the size of the clevis hook at the top of the DCT-75 and DCT-85? | Usable opening on the clevis hook is 1-1/4 inches. | DCT-75,DCT-85 |
| What is the diameter of the wheel on the HTWL-800-HR? | The diameter of the wheel is 10". | HTWL-800-HR |
| How many pumps does it take to raised height? | Fully loaded would be approximately 31 pumps. An unloaded unit would be approximately 30 pumps to the raised height. | ABS-130 |
| What is the standard voltage and phase? Can the voltage and phase be changed? | The lift tables come standard 460 V 3 phase. The voltage and phase can be changed. For details, please see "options for electric hydraulic equipment" or contact a sales associate for voltage options. | |
| What is the standard voltage and phase? Can the voltage and phase be changed? | The lift tables come standard 460 V 3 phase. The voltage and phase can be changed. For details, please see "options for electric hydraulic equipment" or contact a sales associate for voltage options. | |
| What is the standard voltage and phase? Can the voltage and phase be changed? | The lift tables come standard 460 V 3 phase. The voltage and phase can be changed. For details, please see "options for electric hydraulic equipment" or contact a sales associate for voltage options. | |
| What is the standard voltage and phase? Can the voltage and phase be changed? | The lift tables come standard 460 V 3 phase. The voltage and phase can be changed. For details, please see "options for electric hydraulic equipment" or contact a sales associate for voltage options. | |
| What is the standard voltage and phase? Can the voltage and phase be changed? | The lift tables come standard 460 V 3 phase. The voltage and phase can be changed. For details, please see "options for electric hydraulic equipment" or contact a sales associate for voltage options. | |
| What is the standard voltage and phase? Can the voltage and phase be changed? | The lift tables come standard 460 V 3 phase. The voltage and phase can be changed. For details, please see "options for electric hydraulic equipment" or contact a sales associate for voltage options. | |
| What is the standard voltage and phase? Can the voltage and phase be changed? | The lift tables come standard 460 V 3 phase. The voltage and phase can be changed. For details, please see "options for electric hydraulic equipment" or contact a sales associate for voltage options. | |
| What is the standard voltage and phase? Can the voltage and phase be changed? | The lift tables come standard 460 V 3 phase. The voltage and phase can be changed. For details, please see "options for electric hydraulic equipment" or contact a sales associate for voltage options. | |
| What is the standard voltage and phase? Can the voltage and phase be changed? | The lift tables come standard 460 V 3 phase. The voltage and phase can be changed. For details, please see "options for electric hydraulic equipment" or contact a sales associate for voltage options. | |
| What is the standard voltage and phase? Can the voltage and phase be changed? | The lift tables come standard 460 V 3 phase. The voltage and phase can be changed. For details, please see "options for electric hydraulic equipment" or contact a sales associate for voltage options. | |
| What is the standard voltage and phase? Can the voltage and phase be changed? | The lift tables come standard 460 V 3 phase. The voltage and phase can be changed. For details, please see "options for electric hydraulic equipment" or contact a sales associate for voltage options. | |
| What is the standard voltage and phase? Can the voltage and phase be changed? | The lift tables come standard 460 V 3 phase. The voltage and phase can be changed. For details, please see "options for electric hydraulic equipment" or contact a sales associate for voltage options. | |
| What is the standard voltage and phase? Can the voltage and phase be changed? | The box dumpers come standard 460 V 3 phase. The voltage and phase can be changed. Please contact a sales associate for voltage options. | |
| What are the inside dimensions of the cart ROL-85? | The inside dimensions are 25"wide x 31" deep x 59"tall | ROL-85 |
| How many detents (CA-HOD) are there if we add that option to the king pin carousel? | There will be one locking detent welded to the base, and (4) locking positions welded to the top plate, 90 degrees apart. | CA-KP, CA-HOD |
| What is the maximum thickness the PKG-PTC will work with? | Maximum Thickness is 0.035" | PKG-PTC |
| What is the difference between the standard (IDC) and the high cycle (HC)? | HDC-905-HC is high cycle version. It has a heavy duty continuous run (with timer) power unit and will basically do unlimited number of cycles. Standard unit is designed for a duty cycle that will allow for crushing or compacting up to 250 drums per week in a typical non-hazardous, indoor room-temperature environment when operated on a three-phase power supply. | HDC-905-IDC/460V,HDC-905-HC/460V,HDC-905-IDC/230V,HDC-905-HC/230V,HDC-905-IDC/208V,HDC-905-HC/208V |
| What is the standard voltage and phase? Can the voltage and phase be changed? | The lift tables come standard 460 V 3 phase. The voltage and phase can be changed. For details, please see "options for electric hydraulic equipment" or contact a sales associate for voltage options. | |
| What is the deck size for the platform (VWS-DK)? | The platform option is 21-3/4"x29-1/2" | VWS-DK |
| What is the speed of travel for this pallet truck? | The electric pallet truck travels 2.7 mph without load and 1.8 mph with load. | PMC-EPT-2045,PMC-EPT-2745 |
| What is the diameter of the hole on the drop pin? | The diameter of the hole is 1/2". | EXGATE-30-C |
| Are the keys interchangeable with the bollards? | Yes, the keys are interchangeable. | PARK-P-108-FD,PARK-P-108FD-SS,PARK-P-60-FD,PARK-P-76-FD |
| On the CART-1000-LD-DC what is the raise and lower time? | The raise time is 15 seconds. The lower time is 13 seconds. | CART-1000-LD-DC |
| Is the battery charger UL listed? | Yes the battery charger is UL listed. | CART-1000D-DC |
| What is the fork pocket opening size on the FMDL-1500? | The pockets measure 7" wide x 2.5" tall. | FMDL-1500 |
| What is the inside dimension of the dolly? | The inside diameter is 10-3/4". | PDD-5 |
| What are the raise/lower times for the UNI-4848-4-BLU at 460V 3 phase vs the UNI-4848-4-BLU at 115V 1 phase? | UNI-4848-4-BLU-460-3 = APPROX 16 SEC RAISE AND 12 SEC LOWER @ 460V 3PH AC 2HP 3.1 AMPS UNI-4848-4-BLU-115-1 = APPROX 41 SEC RAISE AND 12 SEC LOWER @ 115V 1PH AC 3/4 HP 12 AMPS | UNI-4848-4-BLU-460-3 , UNI-4848-4-BLU-115-1 |
| What is the maximum width between the outer leg supports? | The maximum width is 50". | VHPS-3000-AA-17 |
| What is the volume of oil inside the hydraulic cylinder of the L-220-HD? | The volume of oil is .75 quart. | L-220-HD |
| How many strokes does it take to raise LTT-2145? | It takes 33 strokes to raise LTT-2145. | LTT-2145 |
| What is the gauge of steel or thickness of the platform? | The platform is 14 gauge steel and is .082". | ECSPT-1832,ECSPT-2436,ECSPT-2448,ECSPT-2460,ECSPT-2754,ECSPT-3060-ECSPT-3672 |
| What is the thickness of the steel grates? | The steel grates on the EA-SKRG-60-LP are 0.25" thick. | EA-SKRG-60-LP |
| What is the distance between the "slats"? | The slats are 3" with 1/4" between the slats. | EA-SKRG-60-LP |
| How many rails would this cart hold? | The PRAIL-CT-1 holds approximately 60 rails. | PRAIL-CT-1 |
| How many rails would this cart hold? | The PRAIL-CT-1 holds approximately 60 rails. | PRAIL-CT-1 |
| What is the deck size for the platform (VHPS-DK)? | The platform option is 27 1/4" x 42" | VHPS-DK |
| What is the length of the pull chain? | The pull chain on the HCH-2-10 is 105". | HCH-2-10 |
| What is the diameter of the light unit ? | The diameter of the light is approximately 6 3/4". | LL-HD-LED-24 |
| How many pumps would it take to raise to full height on the PP-2072? | It would take approximately 25 strokes. | PP-1572-36, PP-2066, PP-2072, PP-2566, PP-2572, P-3066, 993072 |
| How long does it take CART-LP-2000-2040-DC to go from the lowered position to maximum height ? | CART-LP-2000-2040-DC will raise from the lowered position to maximum height in 14 seconds. | CART-LP-2000-2040-DC |
| For the WL-100 Pit Depth with the Roll-Over option, does it impact the lowered height? | The WL-100 PIT DEPTH with ROLL-OVER OPTION increases the lowered height 2" | WL-100 |
| What tools will you need to assemble these picnic tables? | The unit is bolted together. Will need a 12mm and 14mm wrench to assemble. | PT-MX-RT-46-BK,PT-MX-RT-46-BN,PT-MX-RT-46-GN,PT-MX-ST-46-BK,PT-MX-ST-46-BN,RT-MX-ST-46-GN, PR-MX-3072-BK,PT-MX-3072-BN,PT-MX-3072-GN, PT-MX-3096-BK, PT-MX-3096-BN, PT-MX-3096-GN |
| Will the tilt stand work with the IBC-275 or the IBC-330? | The tilt stands can be used with the IBC-275 and the IBC-330. | IBC-TLT-FP, IBC-TLT-FPL |
| Is there an option to blow warm air instead of cool air with the air curtain ? | There is not an option on the air curtain to blow warm air. | ACURT-36, ACURT-48, ACURT-60, ACURT-72, ACURT-96, ACURT-108, ACURT-120 |
| Can the air curtain be installed outside ? | The air curtain is designed for indoor use only. | ACURT-36, ACURT-48, ACURT-60, ACURT-72, ACURT-96, ACURT-108, ACURT-120 |
| Can casters be added to these hoppers? | Yes! Caster kits containing (4) casters are available for these hoppers. You will find them under the options tab for the low profile H-style hoppers. | HDROP |
| What is the amp draw of the hydraulic system on CART-1000-DC? | 148 amps with load and 54 amps without load. | CART-1000-DC |
| I am looking to take my PST up and down a slope. What is the maximum incline a PST can safely travel on? | Maximum of a 4 degree angle incline. | PST |
| What is the hook to ground measurement when boom is fully extended both horizontally and vertically? | The hook to ground measurement is 110" | P-JIB-2, P-JIB-4 |
| What is the tensile strength listed for a model number AS-344? | The tensile strength is 400MPa . | AS-344 |
| What is the length of the pendant/hand control of model EMH-5? | There are two cords to the pendant. One is 265" and the other is 185". | EMH-5 |
| What is the thickness of the metal? How does this compare to a paint can specifications? | The metal is 29 gauge .012 decimal thickness. Paint cans typically have a thickness of .009. | PAIL-STL-RI |
| The description of the OPBOL-31 and OPBOL-47 says they are spring loaded, however I do not see springs on the bases? How does it spring back? | The spring action on these units is made possible by a bungee cord in the base. | OPBOL-31, OPBOL-47 |
| I need a 50hz 3p/400 motor for my scissor lift table. Is this available as an option? | Our standard 60 Hz 3 Phase 460 VAC motor will cover 50Hz 3 Phase 400 VAC. | EHLT |
| Does the SST-45 have a lock to stop the top from rotating ? | We do not have a lock option for the SST products. | SST-45,SST-45-ST, SST-45-PSS, SST-45-PSS-ST |
| Will this cart haul 1200-1500 lbs. at a 23% (13deg) ? | The maximum slope would be 5 degrees with a load of 300 lbs. | OROAD-400 |
| What is the PSI required to operate the AIR-J? | 102-145 PSI is required. | AIR-J |
| What is the Thickness/gauge of the steel on the table surface on the CART-PN-1500? | The steel is gauge 12. | CART-PN |
| Is there an emergency/safety stop in case of hydraulic failure on the CART-PN-1500? | This unit comes with one single lifting assembly. There are no hydraulic hoses in this design and no chance of sudden hydraulic failure. Unit will drift down at very slow pace if there is internal leak and in case of lifting assembly damage it will not lift the table at all. | CART-PN |
| What is the capacity of the ORWC-8-ERGO? | The capacity is five tons. | ORWC-8-ERGO |
| Will the pallets be suitable for use outside in southern Florida? | They can be used outside in that climate, however the color will fade over time. | PLP2-4840 |
| What material is the cable made of? | The cable is stainless steel | WTJ-2-SS, WTJ-4-SS |
| How many strokes of the foot pump must be done to have maximum lifted height ? | The table will raise approximately 0.43" per (foot) pump. | LDLT-3072 |
| What is the amp/hr. rating for the EPT-2748-45-AGM? | AMP rating is 220 AH | EPT-2748-45-AGM |
| What is the amp/hr. rating for the EPT-2748-45 with the lead acid battery ? | AMP rating is 75 AH | EPT-2748-45 |
| What material is used for the solid top pallet? | The top plate on the solid top units is aluminum tread plate with the tread pattern facing down. It is 3003-H22 aluminum. The frame cross members are extruded aluminum - 6063-T6 The riser tubes in the middle are extruded aluminum - 6105-T5 | AP-ST-4824-4W |
| Can you store product on the base of the upright? | Yes, you can store product on the base of the upright. | HU-C-8-18, HU-C-8-24, HU-C-8-36, HU-C-8-48, HU-C-10-18, HU-C-10-24, HU-C-10-36, HU-C-10-48, HU-C-12-18, HU-C-12-24, HU-C-12-36, HU-C-12-48,HU-C-14-18, HU-C-14-24, HU-C-14-36, HU-C-14-48 |
| What is the length of the base for HU-C-8-36? | The base is 36" | HU-C-8-36 |
| What is the turning radius of the pallet master? | The turning radius of the CB-PMPS-10-50-DC is approximately 48". | CB-PMPS-10-50-DC |
| Do you manually rotate the drum or is it powered? | The DRUM-LRT-DC and the DRUM-LRT-DC-SCL have a manual rotation. The DRUM-LRT-DC-II has a powered rotation | DRUM-LRT-DC-SCL, DRUM-LRT-DC, DRUM-LRT-DC-II |
| Do these pallets have a drain plug? | Yes, the ultra spill pallets have a drain plug. | DR-1-UT, DR-2-UT. DR-3-UT, DR-4-UT |
| Can SHEET-R-57 be stacked 2 high? | Yes, it can be stacked 2 high. | SHEET-R-57 |
| Are the shelves on the carts bolted or welded on? | The shelves are welded on. | SPA-HD-2252, SPA-HD-2252-5PU, SPA-HD-2252-6MR, SPA-HD-2852, SPS-HD-2252, SPS-HD-2252-5PU, SPS-HD-2252-6MR, SPS-HF-2252, SPS-HF-2852, SPS-HF-2852-5PU, SPS-HF-2852-6MR |
| What is the amp draw for SWA-60-AW? | 15 AMPS. | SWA-60-AW |
| What speed does this cart travel? | A loaded cart travels 2.4 MPH. An unloaded cart travels 2.7 MPH. | EMHC-3672-1 |
| What is the dimension of the inside diameter of this bollard? | The inside diameter of the BOLPP-48-5.5 is 5.295". | BOLPP-48-5.5 |
| What are the dimensions of this bag? | 16"L x 9"W x 10"H | BAG-12 |
| The wheels on the tugger are foam filled. What material are the front casters? | The front casters are poly on poly. | E-TUG-10, E-TUG-20, E-TUG-30 |
| Does the trash compactor work with plastic drums? | The MTC-55 is designed to work with 30 or 55 gallon drums. Platen size is 21". | MTC-55 |
| What is the thickness of the deck on the platform truck? | The deck thickness is 1/16". | SSPT-2436, SSPT-2448, SSPT-3048, SSPT-3060, SSPT-3672 |
| We are interested in the drum attachment. Will it work with the S3-43-AA, S3-62-AA, S3-118-AA, S3-125-AA? | The S3-SDG-RF works with the S3-43-AA (only). | S3-SDG-RF |
| What kind of batteries does the scale use? | The scale uses 6 AA batteries. | CART-500-SCL, CART-500-SCL-PSS, CART-1000-SCL |
| What is the service range of the pallet jack? | The service range is 3.4" to 8". Lowered height 3.4" , raised height is 8". | EPT-2745-45 |
| What is the minimum amount the load indicators register? | The digital load indicators register from zero to the maximum capacity. | DLI-05, DLI-1, DLI-2, DLI-4, DLI-7, DLI-14 |
| What is the capacity for the ride-on platform? | The capacity for the platform is 250 lbs. | ECM-7635-75 |
| What is the thickness of the plate? | The plate is 1/8" thick. | TAL-PLATE-21, TAL-PLATE-27 |
| Does the PEL-400S-57-D3-KEG come with the platform or just the keg attachment? | The PEL unit comes with both the platform and the keg attachment. | PEL-400S-57-D3-KEG, PEL-400S-72-D3-KEG |
| What gauge is the top plate? | The top plate is 1/4" thick. | DIE-2430-36, DIE-2430-48, DIE-2430-60, DIE-2430-36-C, DIE-2430-48-C, DIE-2430-60-C, DIE-2430-DC-C |
| Is the load capacity the same for the fold-down 21.5" extended nose as it is for the regular 9" solid nose? | Yes , load capacity is the same. | HTWL-600-PN, HTWL-800-HR |
| Are the bags recyclable? | These are made of polypropylene outer and polyethylene inner. Both are recyclable | BAG-4836, BAG-4884 |
| What is the overall height when the boom is extended? | 125"H (boom fully extended and fully raised) | P-JIB-4 |
| What is the length of the line on model P-JIB-4? | 15'-0" cable length | P-JIB-4 |
| I want to use this attachment to pick up small spools of wire. How does it hold the spool in place? | When you turn the crank the rubber expands and grips the inside of the core. You will then be able to rotate the roll. | PEL-RR |
| What is the gauge of steel and thickness of the handle? | The handle is steel and galvanized coated. The diameter is 6 mm. | BKT-GAL-325 |
| Can you tell me what the measurement is from the top of the top horizontal bar to the bottom of the bottom horizontal bar? Or, the distance between the bottom of the top horizontal bar and the top of the bottom horizontal bar? | The measurement is 26-1/4". | PRAIL-102-HD-Y-FF |
| What is the temperature rating on the pallet truck? | The temperature range is -31 degrees F to 12 degrees F. | PM5-CRF-2748 |
| What is the minimum weight that the SC-6, scale can register? | The minimum weight 44.1 lbs. | SC-6 |
| What is the max weight the scale will register? | The scale should be programmed to register to the max capacity. | PM-2048-SCL-LP, PM-2048-SCL-LP-PT, PM-2048-SCL-LP-SS, PM-2146-TL-SCL-LP, PM-2746-TL-SCL-LP, PM-2748-SCL-LP, PM-2748-SCL-LP-E, PM-2748-SCL-LP-PT, PM-2748-SCL-LP-PSS |
| Is this legal for Canada? | Yes, ULc listed. The small "c" stands for Canada. | SH-GUN-P-D |
| What is the width of the straddle? | The Straddle width (outside diameter) is 21-5/8" and the straddle width (inside diameter) is 18" | KLIFT-220 |
| We are expecting to crush about 1500 drums per month. Will this unit work for us? | Approximately 2000 drums per month is possible with HDC-905-HC high cycle crusher. Cycle time is approx 25 seconds. | HDC-905-HC/208V, HDC-905-HD/230V, HDC-905-HD/460V |
| What is the rust inhibitor made of? | This product uses a clear epoxy rust inhibitor. | PAIL-STL-RI |
| What prevents the rungs on the ladder from spinning or coming loose? | The rungs on the ladder are welded in place. | NTAL-7, NTAL-10, NTAL-12, NTAL-15 |
| What is the temperature range for model HEAT-6p-230-1? | Temperature range for the heater is 113-167 degrees F. | HEAT-6P-230-1 |
| How is the temperature controlled within a range for HEAT-6P-230-1? | The temperature is controlled through a light adjustment, the brighter the light, the higher the temperature. | HEAT-6P-230-1 |
| Can this heater run for longer than 50 hours continuously? | It is not recommended to run the heater continuously for 50 hours. Recommend continuous usage is one hour. The operation can be resumed after 15 minutes. | HEAT-6P-230-1 |
| What size anchor bolts do these machine guards use? | 1/2" diameter bolt. A suggested would be the AS-125. | HPRO-RF-36-24-4, HPRO-RF-36-36-4, HPRO-RF-48-24-4, HPRO-RF-48-36-4, HPRO-RF-48-42-4 |
| What is the horsepower of the H-1000-3? | 2.14 horsepower | H-1000-3 |
| Do you have to use the foot control to rotate the stretch wrap machine? | The AW models are automatic and do not use foot controls. | SWA-60-AW, SWA-82-AW |
| Is this hoist CSA compliant? | These hoists are UL listed. They are not CSA compliant. | ECH-03, ECH-06, ECH-10-1PH, ECH-20-1HP, ECH-40-1PH, ECH-60-1PH,ECH-10-3PH, ECH-20-3PH, ECH-40-3PH, ECH-60-3PH, ECH-80-3PH, ECH-100-3PH |
| How much pressure can the IBC-275 be exposed to? | The IBC totes do not have a rated pressure capacity. | IBC-275, IBC-330 |
| What is the center to center measurement in the bolt pattern please? | The center to center measurement in the bolt pattern is 6". | BOL-36-8.5, BOL-42-8.5, BOL-48-8.5 |
| What is the raise and lower time of the WP-400-AC? | The WP-400-AC has a linear actuator (no hydraulics). The zero-load speed is approximately 7 mm/sec (0.28 in/sec), the full-load speed approximately 5 mm/sec (0.2 in/sec). Raised height (12") for fully loaded would be approximately one minute . | WP-400-AC |
| What is the bolt size for the anchor points? | The hole diameter is 9/16" | EHLTG-3850-2-36,EHLTG-3850-4-36,EHLTG-4450-2-36,EHLTG-4450-4-36,EHLTG-5250-2-36,EHLTG-5250-4-36,EHLTG-4470-2-48,EHLTG-4470-4-48,EHLTG-2-48,EHLTG-5270-4-48 |
| Can the light be set to continuous light? | The light is strobe only. | SPBOL-42-BL, SPBOL-BL |
| What is the lift speed of the hoist? | The lift speed of the ECH-RM-20-3PH is 16 feet per minute. | ECH-RM-20-3PH |
| Is the platform removable so the unit can be used just with the forks? | Yes platform is removable on the following models HYD-10, HYD-10-AIR, HYD-10-AS, HYD-10-DA,SS, HYD-10-DC, HYD-10-DC,SS HYD-10-EP. Lift can be used with or without platform (with forks). | HYD-10 |
| Can the lift trucks be pushed while in the raised height? | No they cannot. | HIPM-2048-DC, HIPM-2048-AC, HIPM-2048-AIR, HIPM-2748-DC, HIPM-2748-AC, HIPM-2748-AIR, HIPM-2772-DC, HIPM-2772-AC, HIPM-2772-AIR |
| Can the lift trucks be pushed while in the raised height? | No they cannot. | ULM-HTL-2149-20 |
| Can the lift trucks be pushed while in the raised height? | No they cannot. | L-220-HD, L-270-HD, L270-HD-SS, L-270-DC-HD, L-270-DC-HD,L-270-DC-HD-SS |
| Can the TAL products be pushed while in the up position? | Yes they can be pushed when in the raised height position. | TAL-220-DC, TAL-220-HD, TAL-260-DC, TAL-260-HD |
| What SCH pipe does the bollard use? | The BOLPP bollards use SCH-10 pipe. | BOLPP-24-4.5, BOLPP-24-5.5, BOLPP-24-6.5, BOLPP-36-4.5, BOLPP-36-5.5, BOLPP-36-6.5, BOLPP-42-4.5, BOLPP-42-5.5, BOLPP-42-6.5. BOLPP-48-4.5, BOLPP-48-5.5, BOLPP-48-6.5, BOLPP-62-4.5, BOLPP-62-5.5, BOLPP-62-6.5, BOLPP-72-4.5, BOLPP-72-5.5, BOLPP-72-6.5 |
| I'd like to mount this to the floor. Are there slots in the bottom ring? | There are mounting slots in the bottom ring of the CA-40-4. | CA-40-4 |
| What is the minimum height for stairs? | The maximum step height is 8". The minimum step height is anything less than 8". | PDSC-350-62 |
| Do you have any type of guard to protect from the pinchpoint of the lower guide wheel/rollers ? | Yes, we can add a guard to the floor mounted JIB. Please contact a sales associate for details to modify this unit. | JIB-FM-3,JIB-FM-6,JIB-FM-10,JIB-FM-20,JIB-FM-40 |
| Do you have any type of stop to keep the JIB from rotating 360 degrees? | Yes, our engineering team can add a rotation stop. Please contact a sales associate for details. | JIB-FM-3,JIB-FM-6,JIB-FM-10,JIB-FM-20,JIB-FM-40 |
| Are these car stops flexible? Could they be mounted on a slightly curved surface. | The rubber car stops are "slightly" flexible, especially if they are in the sun. | CS-33-BL, CS-33-BL-3, CS-33-BL-4 |
| Does this scale have a port on the readout when I can attach to a buzzer or alarm light? | There is only one port available. | VLPFS-4A |
| Does model H-4000-1 have a dual voltage compatible with 50 HZ? | Yes it is dual voltage. | H-4000-1 |
| How loud is the motor in the model SCTAB-1000-2040-AC? | The power unit is approximately 72 dB at 2' away. | SCTAB, SCTAB-1000-2040-AC |
| How many turns does it take to rotate 180 degrees? | It is approximately 30 turns of the crank for 180 degree drum rotation. | DCR-RAR-12 |
| What are dimensions of the base plate and size of bolt holes? | The caster pad is 4 x 4 182". The bolts are 10 mm. | ECSPT-2448 |
| I am looking to keep this truck under a deck. I will be mostly, but not 100%, protected from the elements. Is there any reason why this would not be a good choice to be kept outside? | The platform truck could be kept outside, however, there may be some corrosion of the hardware from exposure to the elements. | PPT-2-41, PPT-2-42, PPT-3-61, PPT-3-62 |
| What is the thickness of the steel? | The steel is 14 gauge or 2.15mm. | SDSP-4048 |
| What material are the wheels on the ladder made of and what diameter? | The 4 x 1-1/4" wheels are poly on poly. | LAD-FM-60-PSO, LAD-FM-72-PSO, LAD-FM-84-PSO, LAD-FM-96-PSO, LAD-FM-108-PSO, LAD-FM-120-PSO |
| How does the optional 29-189 work? | The 29-189 Air Vibrator comes with a Simple Manual On/Off Valve. Operator should not turn the Vibrator on and walk away with the Vibrator unattended. The vibrator is only intended to be on for a short duration, just long enough to knock down the material angle of repose near the vacuum lance. Operator should turn on vibrator, watch material fill in around vacuum lance, and then turn off vibrator. Air Vibrator is not available with Automatic On/Off. Must use hand controls. | AIR-THL |
| What is the overall height with the forks raised for A-LIFT-R-HP? | The raised forks are 3" above the frame. | A-LIFT-R-HP |
| At what point does the frame raise? | The frame of the A-LIFT-R-HP telescopes up when it hits 68". | A-LIFT-R-HP |
| What type of rubber is the turntable made of? | The rubber for TT-30-RTP is: natural rubber 15% , synthetic rubber 18%, Recycled rubber 48% and additive 19% | TT-8-7/8, TT-12-7/8, TT-18-7/8, TT-24-7/, TT-30-7/8, TT-8-4, TT-12-4, TT-18-4, TT-N-24-4, TT-N-30-4, TT-18-PED, TT-N-24-PED, TT-18-DPED, TT-N-24-DPED, TT-N-30-DPED, TT-18-CPED, TT-N-24-CPED,TT-18-CDPED, TT-N-24-CDPED, TT-N-30-PED |
| How far apart are he holes on the plate of the floor lock? | 2-3/4" x 3-3/8" center to center | FL-6 |
| What is the overall length of the actuation bar? | The overall length of the FM-BAR is 41". | FM-0648, FM-2066, FM-2072, FM-2078, FM-2566, FM-2572, FM-3066, FM-3072 |
| What is the range of cylinder diameters that can be used with this? | The cylinder hand truck can accommodate cylinder diameters up to 24". | MCHT-350 |
| What degree of incline can this handle loaded? | 6 degrees | RT-S-62-AF |
| What is the IP rating of the E-TUG-20? | The IP rating is IP54. | E-TUG-20 |
| What is the length dimension of a BC-1 from the I-beam clamping point to the bottom of the clamp? | The dimension is dependent on the width of beam that it is installed on. Here are some measurements as reference. Closed end of range 6". In the middle of its range 5". Open end of range 4". | BC-1 |
| What is the factor of safety for SP-TOP ? | The factor of safety is 5:1 | SP-TOP |
| What is the turning radius of the SNM15-62-FF-27? | The turning radius is 53-1/8". | SNM15-62-FF-27 |
| What type of aluminum are the EH dockplates made from? | The EH dockplates are made from 6061 Aluminum. | EH-6024 |
| Are the quilts washable? | Yes they are washable. | QPC-7280-DP-1PK, QPC-7280-DP-4PK, QPC-7280-DP-12PK, QPC-7280-UP-1PK, QPC-7280-UP-4PK, QPC-7280-UP-12PK, QPC-7280-VP-1PK, QPC-7280-VP-4PK, QPC-7280-VP-12PK QPC |
| What gauge of steel is used for these cabinets? | 14 gauge steel. | CYL-H |
| What is the length of the strap? | The strap is 48" long. | LM-HP6-S |
| What type or gauge of aluminum is used in this product? | 6061-T6 aluminum | ACP-1824-9 |
| What gauge steel is the bollard for PARK-P-76? | The bollard is gauge 14 steel. | PARK-P-76 |
| How do you move these carousels? Is there something to use to lift them? | We recommend wedging something between the floor and the carousel (crowbar, prying tool, etc...) and just lift it up a bit so forks can insert under the carousel to lift it . | LP-4000T, LP-4000T-45,LP-4000T-39, LP-4000T-SS, LP-4000T-45-SS, LP-4000T-39-SS |
| What is the finish on the base? | The base of the bollard has a powder coat finish. | PARK-P-108-FD-SS |
| Can we request the position of the stripes? | The red stripes are labels which are shipped unattached. It is up to the customer to apply them if they choose. | PARK-P-108-FD-SS |
| How long can this hoist continuously run, with 400 - 500 lbs. load on it, and how much time must the hoist be "off" to allow for motor/ contacts cool down? | Continuous usage of the hoist would be 15 minutes. Rest time between usage would be 45 minutes. | EMH-10 |
| What is the diameter of the "pipe"? | The diameter of the "pipe" is 7/8". | LAD-1-Y, LAD-2-Y, LAD-3-Y,LAD-4-Y, LAD-5-Y |
| What is the turning radius of the EPT-2745-33 pallet truck? | The turning radius is 52.36" | EPT-2745-33 |
| We are installing the drop in rails on the 42" posts. What is the dimension from the bottom rail to the floor? | The dimension from the floor to the bottom of the lower rail is 2 5/8". | GR-F3R-DI-TP42-YL |
| Which approach ramp works with the edge of dock RAMP-2 OR RAMP-4 ? | Both ramps work with the edge-o-dock. | FM-0648, FM-2066, FM-2072, FM-2078, FM-2566, FM-2572, FM-3066, FM-3072 |
| When the drum is lifted vertically , how far above the floor is the drum? | From the floor to the bottom of the drum is 53". | DRUM-LRT-EC |
| What is the measurement for the opening of the shackle on the HOOK-S-10? | The shackle opening is 1 1/2". | HOOK-S-10 |
| Can you adjust the height of Model: TT-18-LA while the turntable is rotating? | The turntable top and the linear actuator function independently of one another. The turntable is manual rotation, and the linear actuated height adjustment is powered. | TT-18-LA |
| How fast does it move up and down? | It takes approximately 1-1/2 minutes to go from the lowered position to the raised position. | TT-18-LA |
| What hardware is used with the rack guard? | The holes are 9/16" and 1/2" hardware is recommended. Vestil part number AS-124 would work well. | RRG-12-4-YL, RRG-12-6-YL, RRG-18-4-YL, RRG-18-6-YL, RRG-24-4-YL, RRG-24-6-YL |
| Our access door is 84", ceiling clearance is 103" Will this work for us? | No issue overall as mast height is 64" when forks are lowered. Mast overall height when forks are fully raised 90" is 108-1/2". | SNM-90-AA |
| Room ceiling clearance is 103", our load needs to be lifted 80" Will this work for us? | Mast overall height when forks are raised to 80" is 104" which may interfere with ceiling height. | SNM-90-AA |
| How much oil does the dock leveler use? | The EH docklevelers use approximately 1 gallon of oil. | EH-6545 |
| Is the hardware included with the bollard plate? | No, hardware is not included with the BPL-EAP-R-3-8x8 | BPL-EAP-R-3-8X8 |
| What is the clearance underneath the cart? | The clearance is 2" | EMHC-2848-1, EMHC-2860-1, EMHC-2872-1, EMHC-3672-1 |
| What are the hot and cold temperature tolerances for the cart? | The temperature tolerances are from 35 degrees to 90 degrees. | EMHC-2848-1, EMHC-2860-1, EMHC-2872-1, EMHC-3672-1 |
| We have 3 shifts and each shift will be using the dumper. How many dumps per battery charge? | With normal use, a battery charge will last one shift. | JMD-1000-48, JMD-1000-60, JMD-1000-72 |
| Can this be changed to AC powered? | Yes, there are power options available. Please contact a sales associate for assistance. | JMD-1000-48, JMD-1000-60, JMD-1000-72 |
| Does this fan oscillate? | The CCRF-24-W does not oscillate. | CCRF-24-W |
| Do you have a reel rotator with a 6" arbor? | The MWP-RR can accommodate a reel with a 3" core. | MWP |
| Can casters be added to the NB hoppers? | Yes any D-style caster kit can be used with the D style hoppers with No Dump & Bump. | D-75-MD-NB |
| Will the carousel turn if the foot control is not engaged? | The carousel will not turn if the foot control is not engaged. | STPC-WH |
| Will the carousel only rotate with power? | Yes, power must be on to rotate the carousel. | STPC-WH |
| What is the distance from the wheel base to the end of the fork? | It is 12" from the wheel base to the end of the fork. | VHPS-2000-AA |
| What is the capacity of the trash can? | The weight capacity is 211 lbs. | TH-64-BL, TH-64-GRN, TH-64-GU=Y |
| What is the measurement of the "mast" (the triangular piece at the back of the forks)? | The "mast" is 18" tall. | L-220-HD, L-270-HD, L270-HD-SS, L-270-DC-HD, L-270-DC-HD,L-270-DC-HD-SS |
| Can the BTC-PJ be used with a pallet truck? | The BTC-PJ can be use with both a fork truck and a pallet truck. | BTC-PJ |
| What gauge steel are the gates made of? | The safety gates are made with 16 gauge steel. | SLG-6, SLG-8, SLG-10 |
| I purchased the DCT-85 and would like to replace the chain with the handle option. Does that have to be factory installed? | The DCT-R-HC can be retrofitted. | DCT-R-HC |
| What is the capacity of the HYDC-FRKHK? | The HYDC-FRKHK has a 600 lb. capacity. | HYDC-FRKHK |
| Does the ODG-120-BL have a siren? | Yes the ODG-120-BL has blinking lights and a siren. | ODG-120-BL |
| How do the lights and siren on the ODG-120-BL shut off? | The strobe/siren has a position sensor. When the sensor is "bumped" or tilted at an angle the strobe/siren will activate . The strobe/siren will cease once the strobe returns to its vertical position. | ODG-120-BL |
| How many ounces is the material the Dock Seal/Shelter, series D-150/650? | The face and side pads of the dock seal/shelter are constructed with 54 oz. material. The top flap is constructed with 40 oz. material. | D-150/650 |
| What is the diameter of the handrail on the ATS-8-68? | The handrail has a 1-1/4" diameter. | ATS-8-68 |
| I planning on mounting this at the rear of a 12' flat bed, and see that this is a 1 hp motor for the 12V DC - will that run off a standard truck battery ? | Yes, the WTJ-20-4-DC will run off a standard 12V truck battery. | WTJ-20-4-DC |
| Are these units DOT certified? | No, they do not comply with DOT standards. | VTB-5-O, VTB-5-W, VTB-5-Y, VTB-6-O, VTB-6-W, VTB-6-Y |
| What is the horsepower rating for the ECH-20-3PH? | The ECH-20-3PH has a .6 HP rating. | ECH-20-3PH |
| How thick is the steel on the door track protector for model DSP-WF-48-BRL-YL? | The steel is 3/16" thick. | DSP-WF-48-BRL-YL |
| What is the length of the links? | The length of the links is 1-3/8". | BOL-CHAIN |
| What is the dimension of the opening of the links? | The opening of the links is 1/4". | BOL-CHAIN |
| What is the length of the links? | The length of the links is 1-3/8". | CHAIN-316-PF-BL, CHAIN-316-PF-BLK, CHAIN-316-PF-OR, CHAIN-316-PF-RD, CHAIN-316-PF-WHT, CHAIN-316-PF-YL |
| What is the dimension of the opening of the links? | The link opening is 1/4". | CHAIN-316-PF-BL, CHAIN-316-PF-BLK, CHAIN-316-PF-OR, CHAIN-316-PF-RD, CHAIN-316-PF-WHT, CHAIN-316-PF-YL |
| What voltage can be used to charge this stacker? | Charger is designed to accept dual voltage; 115V and 220/230V. | SE/HP-98 |
| What is the adjustment range for this attachment? | The hook adjustment range is from 18-1/2" - 26". | E-TUG-ADSH |
| What is the life expectancy of this spill pallet? | ) Expected lifespan is at least ten (10) years. You can expect longer, but the actual life is dependent on several factors. These pallets use the highest rated UV package in the resin formulation it uses to create the longest outdoor life available for a PE product. These pallets are designed for secondary spill containment for four 55-gal drums or smaller containers. They hold a total of 66-gal should one of the containers on the pallet were to fail and have either a leak or spill. Deterioration will depend on the application and what chemicals may come into contact with the LLDPE that is used to mold this pallet. | DR-4-UT |
| Will any of the inverters work with both skids and pallets? | The PI-P-3000-3254 is designed to work with skids only. THE PI-P-SL-3000-3254, PI-P-SL-3000-3276 & PI-P-SL-3000-4088 can be used with skids and pallets | PI-P-3000-3254, PI-P-SL-3000-3254, PI-P-SL-3000-3276, PI-P-SL-3000-4088 |
| We are looking at the options for the full height pleats and /or guide strips. D-FHFS , D-FHPS. Are these sold individually or as a pair? | The D-FHFS and the D-FHPS options are priced / sold as a pair- one for each side of the dock door. | D-150-XX, D-350-XX |
| Can you please provide us with the scale range? What is the lowest weight that registers? | Lowest weight is 1 lbs. at optimal usage temp and altitude. 3 lbs. would be the easiest for it to read the weight in lbs. increments. | SCALE-STS-44-5K, SCALE-STS-44-10K, SCALE-STS-55-5K, SCALE-STS-55-10K |
| What is the dimension between the legs? | The dimensions between the legs is 47-1/4" | PSDT-ADP-2136 |
| What is the length of the legs? | The legs are 28" long. | PSDT-ADP-2136 |
| Can the speeds of operation be adjusted? | The raise/lower speed is fixed. The drive speed forward/reverse can be adjusted. | DRLT-CB-PDPL, DRLT-CB-54-MDPL |
| Will this tool seal strapping without using the seal clips? | Yes this tool will seal the strapping without the use of the seal clips. | PKG-TSCS-75 |
| Does the EB-1 have a steel insert? | No. There is no steel insert for the EB-1 | EB-1 |
| What is the size of the hole? | The hole in the EB-1 is 0.644x0.269" | EB-1 |
| Do any of these have steel inserts? | Yes they do. They CB-1, CB-2, CB-3, and the CB-4 all have steel inserts. | CB-1, CB-2, CB-3, CB-4 |
| What is the minimum size of cylinder that will work with the CYL-M-10? | The CYL-M-10 is designed for a 10" cylinder. We offer the CYL-M-9 and CYL-M-7. For custom size options, please contact our sales department. | CYL-M-10 |
| Do these units meets PASE or PALD standards? | These floor cranes meet the PASE/PALD standards. | EPFC-16-LP, EPFC-25, EPFC-25-AA, EPFC-CB-15 |
| What are the increments of the scale reading? | Scale reads in 1.0 units. Minimum increments are tenths or 0.1 units. Base reading is 1 lb. and increases by 0.1 from there. Does not extend past 0.1 units. | EHLT-SCALE |
| What is the total capacity/weight when it stops reading? | Each scale has it's designated capacity and display read out is usable to the end of the screen. The scale will no longer operate properly if more than 100 lbs. over the capacity. | EHLT-SCALE |
| What are the dims of the hitch pin on the unit? | The dimensions of the hitch pin are E-TUG-PINH 3/4" SHAFT / 15/16" HEAD / 4 5/8" LONG. | E-TUG-HD-30 |
| Does the FDA-550 work with the DRUM-LRT-EC for a fiber drum? | Yes the FDA-550 with the DRUM-LRT-EC will work for a fiber drum. | DRUM-LRT-EC |
| What is the amperage of the battery chargers? | The battery charger is 115V. 3.1 AMPS. | CART-40-10-DC |
| What is the material of the ring? What is the material of the ball bearings? | Both the ring and the ball bearings are AISI 304 stainless steel. | CA-40-2-SS, CA-40-4-SS, CA-40-6-SS |
| What are the standard colors for the accordion skirt? | The accordion skirt is yellow and black. | ACC |
| Are there other colors available for the accordion skirt? | Customer colors include: Black, red, forest green, blue, champion blue, light green, navy blue, orange, tan, yellow, gray, white and silver silicone-coated fiberglass. Please contact a sales associate for details. | ACC |
| Do you offer customization on the fork blade series? | No, we are unable to offer custom sizes. This series is molded plastic and limited to the standard sizes only. | F4-36, F4-42, F4-48, F4-60, F5-36, F5-42, F5-48, F5-60 |
| Do you have other sizes or capacities? | No, we are not able to offer custom diameters. | LP-4000T, LP-4000T-39, LP-4000T-39-SS, LP-4000T-45, LP-4000T-45-SS |
| What is the compacting plate diameter? | The diameter is 21" | HDC-905-IDC/460V,HDC-905-HC/460V,HDC-905-IDC/230V,HDC-905-HC/230V,HDC-905-IDC/208V,HDC-905-HC/208V |
| Can the LAD-FM series be converted in the field to a powered LAD-FM-PSO? | No, you cannot purchase or retrofit the LAD-FM series to be powered. | LAD-FM-60-PSO, LAD-FM-72-PSO, LAD-FM-84-PSO, LAD-FM-96-PSO, LAD-FM-108-PSO, LAD-FM-120-PSO |
| Can the WL series be used outside? | Yes, the WL-100 lifts can be used outside. | WL-100 |
| Does the CBB-3000-37 have auto-banding? | No. The cardboard bailer does not have auto-banding. | CBB-3000-37 |
| Model: EHN-40-C-AH. I want to know how much air pressure (PSI) it needs to lift equipment. | The air pressure requirement is 70 to 90 psi. | EHN-40-C-AH |
| Is there a suggested maximum speed for the trailer? | Maximum speed for road travel is 45 MPH. | H-TRAIL |
| How long does the battery charge last? | Continuous usage: 2 hours Intermittent use: 6-8 hours | RT-S-62-AF |
| How long to charge the battery? | Charging time: 8-10 hours. | RT-S-62-AF |
| How much 1/4" rope can I put on the WALL-D winch? | The WALL-D can accommodate 32'. | WALL-D |
| How fast does model POS-3636-EH raise and lower? | Speed is approximately 3.5 seconds per inch, 55 seconds for 16" | POS-3636-EH |
| Is there a published recommended minimum aisle to turn these units within when handling a 48" long load? | Approximate Turning Radius = 64" Aisle Width = 120" | TMS-20-DC |
| What core size will the ROLL-D-DLX accept? | Up to 3" | ROLL-D-DLX |
| What is the distance in between the forks for PM4-2148-LP? | The distance between the forks is about 8" | PM4-2148-LP |
| What is the distance between the two feet? | The distance between the two feet is 14.5" | MWP-440-M-SS |
| What type of anchor should be used when installing jib on concrete? | Because this is a lifting crane type product, we would recommend J-Anchors be poured into the concreate pad. Because we do not know the current condition, density, age, etc. of the concreate, we cannot recommend a standard anchor bolt. | WTJ-2, WTJ-2-DC, WTJ-2-G, WTJ-2-G-DC, WTJ-2-SS, WTJ-4, WTJ-4-DC, WTJ-4-G, WTJ-4-G-DC, WTJ-4-SS |
| If we order the V-Groove system, is it possible to keep the gantry on the rail if we only have one person pushing the crane on one side? | We recommend pushing the gantry on both sides when re-positioning it. The V-groove options makes moving much easier. | |
| Is HLD-94-10-P-DC a 12v or 24v? | This has a 24V battery. | HLD-94-10-P-DC |
| Is HLD-94-10-P-DC a rechargeable battery? | The unit comes with an onboard battery charger. | HLD-94-10-P-DC |
| What is the diameter of the bolt for CST-VE-5X2PUP-SWB? | The bolt diameter is 1/2". | CST-VE-5X2PUP-SWB |
| Is the hydraulic oil food grade? | No food grade oil does not come standard with the cart. Food grade oil is an option. Please contact a sales associate for assistance. | CART-1750-PSS |
| The top of the top of the stand has a circular top with cutouts. What are the dimensions of the 8 holes? | The top plate has 6 slots that are 1/2" x 1 7/16". The other two slots are 1/2" x 1". | AWS-50 |
| What is the thickness of the forks? | The forks are 1-3/4" thick. | VHPS-NM-1000-FF |
| I have fiber drums. Will this work? | Yes fiber drums can be used with the drum crusher | HDC-905-IDC/460V,HDC-905-HC/460V,HDC-905-IDC/230V,HDC-905-HC/230V,HDC-905-IDC/208V,HDC-905-HC/208V |
| What is the max amp draw for this unit? | Amp draw with load:20A Amp draw without load:16A | HST-40-ST |
| What are the dimensions of the BAG-12? | The dimensions of the bag when zipped are 9 in wide x 17 in long x 10 in tall. When the bag is unzipped dimensions are 9 in wide x 17 in long x 11 in tall. | BAG-12 |
| What is the diameter of the "railing"? | The diameter of the railing is 1-1/4". | SPA-2-2236, SPA-3-2236, SPS-2-2236, SPS-3-2236 |
| What is the safety factor for this crane? | The safety factor for the CBFC-2000 is 3:1 | CBFC-2000 |
| What is the AMP range for the HDC-905-IDC/460V? | The 460V 3 phase full - load current is 9.5 AMPS. | HDC-905-IDC/460V |
| Can the toe board & top bar on the top platform of the ladder be removed? | The bar and toe guard at the top of the platform are both bolt on. | LAD-6-14-G-EZ |
| Can the toe board & top bar on the top platform of the ladder be removed? | The bar and toe guard at the top of the platform are both bolt on. | LAD-16-21-P-EZ |
| For the electric hydraulic dock levelers, are there any industry standards or guidelines that need to be followed for conduit placement in a pit for an EH ? | The National Electrical Code indicates the requirements and limitations for approved premises wiring methods, including access requirements. There is a lot of leeway for placement of a conduit used to provided power and control wiring to the inside of the dock leveler. The location for the end of the raceway in the pit wall merely needs to allow for connection to whatever wiring method is chosen for the power and control circuit run. | EH-65-20 |
| Is the EHU-2 CSA compliant? | No. The EHU-2 is not CSA compliant. | EHU-2 |
| What is the speed of this unit? | Factory speed is set at 2.8MPH unloaded and 2.2MPH loaded. | E-TUG-30 |
| What is the size of the casters? | Wheel diameter is 4 in x 1.25 in and the stem is 1/2 in and 2 in long. | OCTO-55 |
| Is the VS-ECH-5-1PH CSA- compliant? | No. The VS-ECH-5-1PH is not UL or CSA approved. | VS-ECH-5-1PH |
| Does the bench in each cage image come with the cage? | The bench does not come standard with the driver cage, however it can be added as an option. Please contact a sales associate for details. | WPC-D-4X4-2, WPC-D-4X6-2, WPC-D-4X8-2, WPC-D-4X4-3, WPC-D-4X6-3, WPC-D-4X8-3 |
| IS the MWP-330-DC-SS CSA compliant? | No, it is not but we do have the option to add a CSA compliant battery charger. Please contact a sales associate for details. | MWP-330-dc-ss |
| For the AHS-STOL ,what size bolts would we need to anchor this to the floor? | 1/2" bolts. | AHS-STOL |
| What material thickness is the tabletop on a wt-2424? | Material on the WT-2424is 12 gauge or approximately 0.1". | WT-2424 |
| What is the Amp draw or Watts for model EAH-3672-MT? | 4.5 amps draw. | EAH-3672-MT |
| How are forks and outriggers are “locked” into place? | The outriggers are secured with bolts and the forks rely on static weight. | PMC-VHPS-2000-AA |
| What is the diameter of the mast of the WTJ-20-4-DC? | The diameter of the mast is 4" | |
| What is the scale accuracy for EPT-2748-45-SCL? | The scale accuracy is 0.1% of applied load. | EPT-2748-45-SCL |
| Are our scissor lift tables power up/ gravity down? | Yes they are. | EHLT |
| What is the length of the spikes? | The spikes are 12" long for SBRY-72-A. | SBRY-72-A |
| Do the j bolts that you anchor the base in the concrete come with the JIB? | No. The "J BOLTS" do not come with the floor mounted JIB. | JIB-FM-3,JIB-FM-6,JIB-FM-10,JIB-FM-20,JIB-FM-40 |
| What is the dimension of the platform on the LO-DC-SCL? | The platform measures 24-3/4 in wide X 17 in deep. | LO-DC-SCL |
| What is the length of the power cord? | The power cord is 5 ft. | SCALE-S-CFT-44-5K,SCALE-S-CFT-55-5K,SCALE-S-CFT-44-10K,SCALE-S-CFT-55-10K |
| What is the material difference between LP and LPX models? | LP models are 10 GA. material (0.1345 thick) and have a weld on cutting edge LPX models are 1/4 in (0.25 thick) and have a bolt on cutting edge. | EA-SKSB-60-LP, EA-SKSB-60-LPX |
| What is the battery life of the MWP-500-DC? | Continuous use would be approximately 10-12 hours. Battery lift could be impacted by weight lifted in addition to other factors. | MWP-500-DC |
| What is the outside diameter of the roll? | The outside diameter is 8". | SWA-FILM |
| What is the dimension of the lip on this dolly? | The lip dimension is 1-3/8". | OCTO-55 |
| Can this bollard be locked in the folded-down position? | No, the bollard cannot be locked in the fold-down position. | PARK-P-108-FD |
| Which caster kits are compatible with the 1/3 cubic yard and 3/4 cubic yard hoppers? | The caster kit options with 3 casters would be compatible with the H-33 series and H-75 series hoppers. | H-33-LD, H-33-MD, H-33-HD, H-75-LD, H-75-MD, H-75-HD |
| Which caster kits are compatible with the 1/3 cubic yard and 3/4 cubic yard hoppers? | The caster kit options with 3 casters would be compatible with the H-33 series and H-75 series hoppers. | H-33-LD, H-33-MD, H-33-HD, H-75-LD, H-75-MD, H-75-HD |
| What is the travel speed for this powered drive unit? | This unit comes with variable travel speed. Customer can adjust the speed by rotating the throttle from 0 mph to 1.8 mph. | S-118-FF |
| Is the chain on CDL-2000 lifter coated? | Yes, the chain is zinc plated. | CDL-2000 |
| What is the impact rating of the bollard? | The 5.5" bollard has an impact rating of 4,000 lbs. of force at 4 MPH. | BOL-R-48-5.5 |
| Can this be installed and used outdoors? | The box dumper is liquid painted carbon steel and will rust when installed outside. We do offer a washdown option and a cold oil option. | HBD-2-36,HBD-2-48,HBD-2-60,HBD-4-36,HBD-4-48,HBD-4-60,HBD-6-36,HBD-6-48,HBD-6-60 |
| What is the IP rating for operation outdoors? | The IP rating is IP50. | RT-EPT-3-24, RT-EPT-3-48 |
| What is the maximum number of shelves can be added for VRSOR-60? | The unit has 67 in useable space with mounting holes 2-1/4 in apart. Each shelf needs approximately 6 in to function properly. Capacity is 6,000 per set and 1,500 per shelf. | VRSOR-60 |
| Will model PSDT handle drums with a removable top and retaining ring? | Yes, the PSDT can be used with a steel, 55 gallon, drum with a removable top & retaining ring. | PSDT |
| On your model number HFMS-48, the magnetic pull is 55 pounds. Do you know at what height? | Maximum 1 to 2 in from ground. | HFMS-48 |
| What is the width of the opening where you attach the handle to the machine roller? | The width is 1". | VHMH-36-2 |
| What is the gauge and thickness of the steel, please? | The lip, mid plate, and back plate are all 3/8 in for Models FM/PE/PP 20,000 lb. capacity. | FM-2072 |
| IS AN ACCORDIAN SKIRT AVAILABLE FOR THE HST-40-ST? | Yes, there is an option for an according skirt. Please contact a sales associate for assistance. | HST-40-ST |
| What is the gauge of steel? | The steel is 8 ga. | EA-SKHH-200 |
| How many drums this can lift per hour? | Maximum 12 drums per hour is recommended. It takes approximately 30 seconds to raise and approximately 18 seconds to lower. | HDC-305-96-DC |
| What are the dimensions of the "slots" in the dollies? | 2"W x 2-3/4"D x 2-7/8"L (front to back) | CMD-A-NS-200-4PK |
| Can an accordion skirt be added to these tables? | No. Accordion skirts are no available for these tables. | EHE-2, EHU-2, EHE-3, EHU-3, EHU-12-SS |
| What is the thickness of the nose plate? | The nose plate is 1/4" thick. | FCHT-34 |
| What is the maximum weight of the box can be used on this? | Weight should not exceed 70 lbs. | ASM-3123 |
| What type of stainless steel is the EHU-12-SS? | 304 stainless steel | EHU-12-SS |
| For the PWP-4840, is the binding resin phenol or urea based? | The pallets have a urea base resin. | PWP-4840 |
| Is the model D-HEAD-1 "Non-Sparking" or not Non-sparking? | NOT "Non-Sparking". | D-HEAD-1 |
| I'm looking at RDC-1000-5PU. I would like to know how high the drum will be off the ground when tilted horizontally. Can you let me know the height? | 17 1/2 in from floor when drum is in a horizontal position. | RDC-1000-5PU, RDC-1000-5PO, RDC-1000-5SS |
| What is the dimension of the magnet for model MS-48 (not counting the handle)? | The magnet measures 48 in long X 3 in wide X 4 in tall. | MS-48 |
| What are the dimensions of the mounting plate for the caster? | The mounting plate is 4.5" wide x 4" long. | CST-VE-4X2TPR-SWTB |
| What is the clearance under the IBC-TLT-FPL? | When the IBC-TLT-FPL is in the raised position, underneath clearance is 31 1/4". IN the lowered position, underneath clearance is 7 1/4". | IBC-TLT-FPL |
| Are the paint cans lined? | The MRC-16 paint can is not lined. | MRC-16 |
| How well do these lock systems operate in cold, freezing weather elements? I have a customer that is based in MN. | We suggest using the low temp oil in freezing climates. | TL-100-F-S |
| Are all the bearings sealed or open on the PST ? | The bearings are open. | PST |
| What is the hydraulic fluid ? | The hydraulic fluid is ISO 32. | PST |
| Can this stacker be used in the sand? | No, the stacker is not intended to be used in the sand. | RT-S-62-AF |
| What is the time it takes to raise the cart to the max height? | The CART-1500-DC-CTD unloaded would take 11 seconds to max height. When the cart is loaded it would take 13 seconds to raise to max height. | CART-1500-DC-CTD |
| Is there an air powered option for this table? | For air powered option, the part number would be ROTARY-DA-HHPB. | EHLTT |
| Does the drum truck have steel or metal hubs? | The DBT-1000 with hard rubber wheels has a hard plastic hub. The DBT-1000-PN with pneumatic wheels has a steel hub. | DBT-1000 |
| What is the thickness of the material used in the IBEAM-GRD? | The nominal thickness is 0.2 in but dims could be slightly thinner or thicker in some parts of the profile. | IBEAM-GRD |
| Is there a foot control option for the VHPS-2200-AA | VHPS-2200-AA is BOTH a hand and foot operated lift. | VHPS-2200-AA |
| What is the inside dimension between the forks on the EPT-1540-26? | Dimension between the forks is 4.25". | EPT-1540-26 |
| Can you confirm that this unit will accept a medium base PAR38 LED flood lamp? | Yes, the LL-40 dock loading light will accept any PAR38 medium base lamp. | LL-40 |
| What is the distance between arms on the SR-SS? | 7-1/4" Clearance between arms. | SR-SS |
| Does the mounting hardware come with the railing? | The hardware is not included. They are available in a 4 pack - one is needed per railing. 1/2" x 4" anchor bolts. The part number is AS-124-4pk. | VDKR-BP-5-YL |
| What is the thickness of the steel on the rings? | The steel rings are 3/16". | CA-18-2,CA-24-2,CA-24-4,CA-30-2,CA-30-4,CA-36-2,CA-36-4,CA-40-2,CA-40-4,CA-40-6,CA-48-2,CA-48-4,CA-48-6,CA-60-2,CA-60-4,CA-60-6,CA-72-2,CA-72-4,CA-72-6 |
| What is the thickness of the fork on model VHPS-NM-600-39? | The fork is 1 3/4" thick. | VHPS-NM-600-39 |
| What grade is the steel on the chain? | The steel grade is galv G-30 | BOL-CHAIN |
| What service class is the SBM-60-12 built to? | Design Category B and Service Category 1 | SBM-60-12 |
| I see that you do custom designs on these ladders. What is the maximum height? | The ATS-68 (68 degree step angle) can be designed up to 204" top step height. The ATS-56 (56 degree step angle) can be designed up to 168" top step height. Please contact a sales associate for details. | ATS-68, ATS-56 |
| Does the unit have a containment pallet included? | Spill pallet with drain is included. | DSHRT-2 |
| What is the capacity of containment of DSHRT-2? | 66 gallons containment capacity. | DSHRT-2 |
| What material are the ball bearings? | The ball bearings in the LP-4000T-39-SS are 9/16" stainless steel. | LP-4000T-39-SS |
| How thick is the wall of the bollard? | The stainless steel bollards are 4" sch-10 pipe, 12" wall thickness. | BOL-SS-36-4.5, BOL-SS-42-4.5 |
| What is the braking mechanism that holds the lift table? Is it a servo motor brake? | The PEL-88S-D3 uses a gear box. | PEL-88S-D3 |
| Does the battery charger work with both 115V and 230V? | Yes, the charger used on the PEL-88 can be powered from a 208-230V circuit, but the power cord that comes with the charger has a 115V, 2-prong plug. | PEL-88,PEL-100,PEL400 |
| What is the thickness of the steel/platform? | 12 GAUGE | PNU-2436 |
| Can you tell me what the distance is between each hole is going vertical and horizontal on the E-TUG-HD-SBH-8? | Horizontal- 2 7/8 in (3 3/8 in on center) Vertical- 7/8 in (1 3/4 in on center) | E-TUG-HD-SBH-8 |
| Do the booms fall under ANSI ITSDF B56 standards? | Yes the lift master booms fall under the ANSI B56 standards. | LM-EBT, LM-OBT, LM-1T |
| How thick is the strapping? | The strapping is .024" thick. | ST-12-16X6-BL |
| What is the life expectancy of this unit? | The life time of the projector is approximately 30,000 hours. | VSP-12-001 |
| What is the minimum factor of safety for the crane design for the WTJ-20-4-DC? | All units (WTJ series on this product page) are built to a 3:1 safety factor. | WTJ-20-4-DC |
| In the event of a power failure (or if the battery becomes disconnected from the motor), what happens to the motor? Does the cargo remain at its current location mid-lift, or will the motor release the cargo? | Load will not drop if power is lost to the motor. The AC winch includes an emergency hand crank in the event of power loss. | WTJ-20-4-DC |
| What degree of incline will the SLNM-63-AA allow? | 0 degree incline. | SLNM-63-AA |
| What parts of model EHU-12-SS are NOT stainless steel? | The Power unit and the Hydraulic Hoses are not stainless steel. | EHU-12-SS |
| Will the S-MU-VDGR-64 work with 30 gallon drums? | Yes this will work with 30 gallon standard steel or stainless steel drums. | S-MU-VDGR-64 |
| I am looking for the safety factor on the magnetic lifter. ASME uses a 3:1 but I didn't see that. | The safety factor on the magnetic lifters depends on the material thickness of the plate. | ML-6 |
| How long will the charge last on the batter and what are the working hours for model SC-06? | The batter will last 4 to 6 hours for continuous usage. Battery Charging time: 6 to 8 hours | SC-06 |
| What is the height from the floor to the bottom of the cart in the lowered position? | It is 8.5" from floor to bottom of CART-PN-400. | CART-PN-400 |
| What is the degree of rotation for the gripper? | The rotation is 360. | S-MU-VDGR-64, S-MU-VDGR-72 |
| On the electric car mover, can the two plates accommodate a 12" tire? | Yes with a minimum of a 4" clearance. | ECM-635-75 |
| What is the maximum carpet roll that can be used on the CARPET-D? | The maximum would be a 12' wide roll of carpet. | CARPET-D |
| What are the mounting hole dimensions for the E-TUG-HD-SLH? | The mounting hole dimensions are as follows: 3 1/2 in wide on center x 1 7/8 in tall on center Holes are 1/2 in wide x 7/8 in tall | E-TUG-HD-SLH |
| What is the noise level of HDC-905 drum crusher? | The noise level is 75 dB at 3' from the power unit. | HDC-900-GPT |
| Can we use this in a washdown area? | The expandable roller conveyors are powdered coat/zinc plated and would be subject to rust. They are not recommended for a washdown area. | EXCNV-R-24-24 |
| What is the dimension from the platform to the hooks on the BBL-B001 where the bag would be hung? | That dimension is 52". | BBL-B001 |
| What is the dimension from the platform to the hooks on the BBL-RK-72 where the bag would be hung? | That dimension is 52". | BBL-RK-72 |
| What is the turning radius of the EOP-440? | The turning radius is 43 3/8". | EOP-440 |
| I see this table comes with a foot control. Can I switch to a hand control? | Yes the part number to switch to a hand control would be HH2PB-8-FC-2 | EHLTG-4450-2-36 |
| What is the gauge and thickness of the steel, please? | The lip and mid plate are 1/2 in. The back plate is 3/8 in for models FM/PE/PP 25,000 lb. capacity. | FM-2572 |
| What is the gauge and thickness of the steel, please? | Models FM/PE/PP 30,000 lb. capacity the lip, mid plate and back plate are all 1/2". | FM-3072 |
| What is the gauge and thickness of the steel, please? | On the FM-0648 the lip, mid plate, and back plate are all 1/4 in. | FM-0648 |
| Is the frame on the PRTD series welded or bolted together? | The frame is welded together. | PRTD-10-42-19 |
| Are the mounting tabs welded or screwed on the panel APG-M-35? | The mounting tabs are welded on. | APG-M-35 |
| Are these wheel chocks solid or hollow? | The urethane wheel chocks are hollow inside. | URWC-8 |
| What is the depth of the CASE-L? | The inside dimensions of the CASE-L. 12" wide 17" Long 16 3/8" deep. | CASE-L |
| I see under the options tab the D-TILT. Does that have to be installed at the time I order a hopper? | The D-TILT can be customer/field installed. | D-TILT |
| I'm looking at the EOP-440. Is the batter charger a 110V wall charger? | The EOP-440 charger comes with a standard 110V plug. | EOP-440 |
| Is the speed that the barrel tumbles adjustable? | Yes the drum speed is adjustable. 30 gallon drum speed is from 8 to 25 RPM's. 55 gallon drum speed is from 7 to 20 RPM's. | DRM-H-3055 |
| Is this product bendable? | The rubber can bend, but it is meant to be mounted on a flat surface. | BS-24 |
| How tall can it reach? | Overall height is 79.375". Maximum height is 53". Maximum travel distance is 49". | HYD-15 |
| Can I replace the casters with different wheels with brake? | Yes, They can be replaced! The Casters are bolted on with flat head bolts and can be reused to change out casters with the same bolt spacing. | HDOS-2436-9 |
| Will the base accept the 3/4" anchors okay as an upgrade? | Bolt Hole Diameter (in) 0.375" Base 7.5"L x Base 8.25"W and .315" thickness. We have measured a unit, and no you cannot use a 3/4 in anchor with this unit. The mounting holes will only accept a max 3/8 in. | PARK-P-108-FD |
| What width of fork is this for? | 124.125"L x 9.5"W x 2.3125"H are the dims, the overall width is 9.5". | FE-6-120-P |
| Can BOL-CI-38-8 be used as a decorative cover over a 4.5" pipe bollard? | The inner diameter is 4.5", so the largest pipe bollard diameter we suggest is 4" | BOL-CI-38-8 |
| Can these pallets be used to stack/store bricks on outside? | Plastic pallets are ideal for export, pharmaceutical, medical, and food applications. The Static Capacity is 8,000 (lbs) and the Dynamic Capacity 2200 (lbs). | PLP2-4840-BLACK |
| Is there an attachment to help raise it higher? | No. Maximum Overall Height 198.06". Adjustable Height yes. Increment Height Adjustment 6". Maximum Clearance 192". Minimum Clearance 126". | AHS-2-10-16 |
| How large are the openings in the grid work for APG-M-38? | The standard is a 2 x 2 opening. | APG-M-38 |
| I see from the picture that the wheels are plastic. Can the plastic wheels really hold up to lots of heavy use? | Yes up to 1200 lbs. Great for moving heavy appliances and vending machines. | APPL-1200-66 |
| What is the arch size, speed/minute, strapping size(s)? | Fits 16" diameter roll, strapping size 1/2", 23 1/8"L x 48 3/8"W x 58"H. | ASM-3123 |
| What is the distance between the mounting holes for B-818-SF? | 8" | |
| What is the dimension of nut these fit? | These plastic bolt caps are designed to finish and protect bolt threads. They have an easy press fit installation over the existing nut. We call it out as a 3/8 ANCHOR BOLT, which would imply a 3/8 nut, the flat to flat dimension is 11/16 in. (3/8" anchor size, nut size M19) | BC-BK-38-PK |
| What size footing must I pour to mount this on? | Outside diameter is 4.5 inches and base is 8" x 8" and the thickness is 0.625 inches. We recommend a 4 in minimum footing. | BOL-36-4.5 |
| Is it hollow? And if so, what is inside diameter?? | Yes and inside diameter is 5.25". | BOL-48-5.5 |
| is the cap removable to add concrete inside the pipe? | Cap is removable and made of plastic. Powder coat finish for baked in added toughness. | BOL-72-4.5 |
| What size chain will fit in the slots of the 36" x 4.5 in bollard for BOL-JK-36-4.5. | 3/16" chain link. | BOL-JK-36-4.5 |
| What is the actual length before being buried in concrete? | Above ground height (in) 48.5. Actual dims are 12.625 L x 12.625 W x 58.5 H. | BOLPP-48-4.5 |
| What is the actual length before being buried in concrete? | Above ground height (in) 48.5. Actual dims are 12.625 L x 12.625 W x 58.5 H. | BOLPP-48-4.5 |
| Can usable height be 38'' , with below ground 24''. I would think from your answer 10'' wouldn't be deep enough?. | Above ground height is 62" and overall height is 72". | BOLPP-62-5.5 |
| How much concrete is needed to fill? | To technically answer the question it will need 2,722 in cubed of concrete (or 0.06 yd cubed). Which really does not mean much to most people so, for the BOLPPs, I use the following website. This calculation page will break it down depending if they are using pre-mixed bags of concreate or ordering in a truck to do several bollards at the same time. https://www.omnicalculator.com/construction/concrete-cylinder | BOLPP-72-6.5 |
| Is there a key to lock the base plate so someone cannot come along and remove the bollard? | No, but you can use your own padlock and key to secure. | BOL-RF-36-5.5 |
| Is there an installation kit, including bolts for the bollards? | Installation kit is not included. | BOL-RF-36-5.5 |
| Can these be used outside? | This steel pipe safety bollard can be used both indoors and outdoors. | BOL-RF-42-4.5 |
| Can the material be trimmed to height for model BPC-48-5.5? | We can cut bollard covers down to any height at no cost. | BPC-48-5.5 |
| Is this ONE piece, or is the top (dome shape) separate for model BPC-48-5.5? | It comes in one piece. | BPC-48-5.5 |
| What is the the thickness of the material for BPC-48-5.5? | The 5.5 in cover (inside 5 7/8 in) comes in 1/4 in thickness only. It can be cut to length (if Vestil is doing it, then it will be an additional charge) It is one piece, and the material thickness is approx. 1/8 in. | BPC-48-5.5 |
| Are these food safe? | No, they are not food safe. | BSG-10G |
| Are they reusable? | Reusable - yes. Usable life - 4 and 12 months. | BSG-10G |
| What is the thickness of the steel? | This guard is 3/8 in thick. | CG-42 |
| Is mounting hardware included with the mirror? | Yes, mounting hardware included for model CNVX-18. | CNVX-18 |
| What is the diameter of the lower pipe for CT-02?, (not the upper one). | Upper and lower are the same, dimensions are 5"L x 9.75"W x 26"H. | CT-02 |
| What is the thickness or gauge of the material? | 26 gauge galvanized steel. | DC-245 |
| Is there a spec sheet that shows the number and type of bolts it has? We lost the bolts and need to get new ones. | P/N: 11052 X 4 Description: Bolt, Hex Head Size: 5/16" - 18 x 5/8" P/N: 16309 X 2 Description: Bolt, Hex Head Size: 5/8" - 18 x 1 - 1/2" P/N: 11113 X 2 Description: Bolt, Hex Head Size: 3/8" - 16 x 2 - 1/2" | DCR-110-55 |
| Is the handle removable? | Yes, the handle is removable. | DESK-M |
| What is the size of the fork pockets? | The size of the fork pockets is 20.5" center to center. | DGS-A-PSD |
| Will this lift plastic drums also? | Holds 55 gallon steel and fiber drums with a top lip only. No, this unit will only work with steel & fiber drums with a sufficient (strong enough) top lip. | DRUM-55-36 |
| Is it compatible with plastic drums? | Yes, this dolly will transport your heavier drums from location to location. Swivel casters with brakes standard. 2000 Lb. Capacity Blue. | DRUM-HD |
| Can this rack be used for outdoor storage? | The DRUM-RACK-2 can be used outside, but must be used on a flat, level, solid surface capable of holding the weight / capacity. However, it is a painted steal construction, so weather & environment could start to degrade the finish & the rack could start to rust, affecting the overall lifespan of the unit. | DRUM-RACK-2 |
| Can you please confirm lifting capacity, the description on Home Depot website says 4,000 lb. capacity. | 6,000 lb. capacity engine hoist is correct. | EHN-60-T |
| Is the 20 in fork width dimension inside fork to inside fork? | Overall Fork Width (in.): 20 | EPT-2048-45-RP |
| What is the height range for model EWB-6030? Since it is adjustable, I need lowest and tallest heights. | Lowest 32.125" and highest 44" | EWB-6030 |
| Is this product suitable for outdoor use? | No, The FEG-E is made of a foam rubber material. It might last for a short time outside, but it is not designed to withstand the elements. | FEG-E |
| How many square foot will a box cover? | Approx. 26 square feet per box. | F-GRID |
| Does this come with a Channeler to anchor in concrete to mount too? | UNIT COMES WITH HANDLE AND BUMPERS. We also have a EDGE-O-DOCKLEVELER OPTIONAL CURB EDGE (CE) available. | FM-2566 |
| What type of metal is this made from? And is it coated with any rust or tarnish resistant material? | The FST-2744-2 is made from a steel construction and is painted silver to help prevent rusting. | FST-2744-2 |
| How many post does the GR-H2R-DI-TP42-HDG system have? | Guard rail level (qty.): 2. One post. The tubular post is an addition to the guard rail system. | GR-H2R-DI-TP42-HDG |
| How many post does the GR-H2R-DI-TP60-HDG system have? | The tubular post is an addition to the guard rail system. Guard rail level (qty.): 3. | GR-H2R-DI-TP60-HDG |
| What is this used for? | This compact hoist features a high efficiency motor with convenient push-button operation. Single phase power available. Chain pulley hoists chain hoist pulley block. It's for "lifting equipment". | H-6000-1 |
| What is the height of the casters? How easy is it to maneuver? | Main deck is approx. 1 in thick. Where the casters are mounted it is almost 2 in thick. Four caster design offers easy maneuverability. | HDOS-2436-9 |
| What is the thickness of the wood? | Main deck is approx. 1 in thick. Where the casters are mounted it is almost 2 in thick. | HDOS-2436-9 |
| Does this product come assembled? | Yes | HDOS-2448-6SW |
| I saw the pipe size this fits is 1-1/4". That translates into 1-5/8 outside diameter correct? | 1.25 L x 5.25 W x 1.125 H and weight is 2 lbs. The OD of the pipe this connector fits on is 1 1/4 in. The bold that holds the connector together can be adjusted, so I believe it will work with a 1 5/8 in OD, but it is designed for the 1 1/4 in OD round. | HRAIL-CON |
| Does this item came already assembled or does it come in separate pieces? | That piece is already assembled. If you need the whole "construction barrier system" it's listed under HRAIL-9072 and will need easy assembly. | HRAIL-PNL |
| How high can it goes when it is full extended all the way up? | When it is extended all the way up it measures 49 inches. | HT-02-1616A |
| What is the weight capacity or each arm for HU-C-8-36-G-SET? | Maximum arm capacity - 2400 lbs. | HU-C-8-36-G-SET |
| What is the maximum operating lift height? | The maximum operating lift height is 43.5" | HWL-330 |
| What is the maximum width between the lifting arms without the platform? | The maximum width between lifting arms without the platform is 15ľ” | HWL-330 |
| How thick are the forks? Will they fit low profile pallets? | Width of the forks 4 3/8", overall fork width 21 3/4", usable length 40". Also fork thickness 0.184" and height 2 3/8". | HYD-10-EP |
| Can this carry a pallet? | No, the positioned allows the user to transport heavy large rolls of material with ease. The simple cradle design of the platform prevents any movement during transporting. | HYD-RR-35 |
| What's the space between the forks? | Overall fork width is 26.75". Approx. 13 1/4 in between forks on the L-270-DC-HD. | L-270-DC-HD |
| What type of spray can do you use with this wand? | Standard size aerosol can of inverted marking spray paint. | LINE-SA |
| What size I beam does this fit? | Fits on wide flange or S-type I-beam. | LOW-2G |
| What is the pull weight for magnet sweeper model MPSR-24-B ? | MPSR-24-B pull weight is 50 lbs. MFSR-24 pull weight is 30 lbs. | MFSR-24 |
| How are these secured? Adhesive or hardware? | No pre-drilled holes. It weighs around 6 lbs. A customer could use a heavy duty adhesive or drill holes & use screws to mount the bumper. | MRCG-20 |
| Can you put 3 together? Need extra wide? | Yes. | MRR-2310 |
| What diameter jack shaft will this caster fit in NJ-CR? | Trailer jack nose caster 6 In. x 2 In. | NJ-CR |
| Is this item food grade? | This unit can be used with hot liquids as well as freezer applications. | PAIL-SCR-35-W |
| Does the lid have a rubber ring on it so it's airtight? | WATERPROOF: YES (high pressure or heat will damage gasket) WATERTIGHT: YES AIRTIGHT WEATHER PROOF: KIND OF (high heat can damage gasket) SPILL PROOF: YES (please don not drop full pail to test this. These are not shatter proof) | PAIL-SCR-5-W |
| What kind of paint is it painted with? | Black R/C enamel, clear epoxy rust inhibitor. | PAIL-STL-RI |
| Could Iuse this bucket to melt hot tar block for driveway cracks? | Ideal for use with oil based or solvent based material. Not recommended for water or water based material. Rated UN 1A2/Y1/2/70 for maximum efficiency. | PAIL-STL-RI-UN |
| How wide does mouth open on the PAL-16? | 5" jaw opening. | PAL-16 |
| I see it mentions industrial uses and "harsh" environments - we're looking to install something like this outdoors, would you recommend that? | Indoor / Outdoor uses. | PARK-P-108-FD |
| If I order two bollards, will they be keyed alike? | If they buy several units they will be the same key. | PARK-P-60-FD |
| Do I need to buy a tensioner as well? | No | PKG-PS-12 |
| What is the maximum material width this unit can accept? | Maximum usable width is 3 3/4" | PLDL-HD-4-8MR |
| Is this pallet rated for outdoor use/ UV stable? | Yes | PLP2-4840-BLACK |
| Does this come pre-assembled or do I have to put it together myself? | This is one piece therefore there's no assembly required. | PLP2-4840-YELLOW |
| What is the wheels overall outside-to-outside width measurement of platform truck? I understand platform truck is 30" wide. Need to verify wheels overall outside-to-outside width measurement to determine minimum width of ramp required. | Overall dimensions are 46.3125 H X 64.5 L X 30 W. The wheel diameter is rear 12" and front 12". | PNU-3060 |
| For model POS-2133-ROPE are the wheels swivel (any direction) or fixed direction? | Poly on poly 3"x1" swivel. | POS-2133-ROPE |
| What grade of stainless is this? | I do not show that these are stainless steel, I show that they are plated. | PTB-32 |
| How do you attach to the wall? | Securely attach to corner with glue or construction adhesive (not included). Holes may also be drilled to allow for bolt-on installation (hardware not included). | PVC-48R-WH |
| How many come in 1 pack? What is the total length? | 1 pc per pack, total length is 2 inches. | PVC-48-WH |
| In the description is says can be attached to corner with glue, but then says screws needed. Do you need glue or screws? | The product itself can be installed with either the glue or screws, it really depends more on the environment. The glue can be used in light contact areas or in areas that a customer cannot, or does not want to, drill holes. The predrilled holes just give the customer the option for a more secure installation, if needed. | PVC-A-2-BG |
| Can these pallets be stored outside? How do they handle the weather? | For the PWP-4840, no, it should not be stored outside. It is made of a press board type material that will absorb any moisture and start to disintegrate the pallet. | PWP-4840 |
| Can I use this as a doorstop for a very heavy door? | Wheel Chock Usage - Multi-Purpose | RBW-2 |
| What is the per 34.875 inch ramp unit weight? | 28 lbs. per unit piece. | RCR-35 |
| I see that the female end pieces are sold separately. Does this kit just contain the center 5 pieces? And I would have to order the female pieces to complete the installation separately? | The RSH-120-36-A will come with everything shown in the drawing. The five middle sections & two female ends. We sell both pre-sized kits, & individual parts so customers can do custom lengths if that fits their applications better. | RSH-120-36-A |
| What should the output voltage be on the solenoid model SE/HP-98? | 12V system. | SE/HP-98 |
| Can the forks on this unit be adjusted to move odd size pallets? | The SL-137-AA has adjust able forks from 8 in wide to 26 3/4 in wide. | SL-137-AA |
| Can I install casters on this pallet? | No | SPL-3636 |
| Does this come with the buckles and how many? | No | ST-12-16X3-BL |
| How wide is the banding, and how thick is it for model ST-12-9X8-B? | Strap Width (in) .5 Thickness (in) .023 | ST-12-9X8-B |
| Will this work on wooden risers? | On the STS, it really depends on if there is a way to secure the STS to the wooden riser. It will not be safe to only set the STS on the existing steps, it will need some structure to screw / bolt to. | STS-36-HDG |
| Does it come assembled? If not, can I get it assembled? | Assembly required - none. | ST-TRUCK-300 |
| How does it draw the liquids up? Is there a hose or tube not pictured? | Manual drum pump design dispenses and transfers liquids for ideal operation. VDP includes a two (2) piece dip tube with connector. The VDPX does have an additional tube that goes into the drum. It comes in 2 pieces for a smaller shipping package. | VDPX |
| Are the forks on this unit adjustable to work with different size pallets? | The VHPS-2000-AA has adjust able forks from 8 1/2 in wide to 26 in wide. | VHPS-2000-AA |
| Do the wheels of this dolly rotate? | No | VPRDO-6 |
| What is the height of the black legs from ground to top of leg? | 6-1/2" | VWS-770-AA |
| Does this model have or need a brake? | WALL-D & WALL-S, they have a friction plate so they do not unwind uncontrollably. | WALL-D |
| What is the recommended wire rope gauge and max length? | On the WALL-D we recommend 1/4 in wire x 26 in long. | WALL-D |
| How much does the top tilt in degrees? | Maximum tilt angle 40. | WT-2016-FP |
| Can this remain on the truck when the truck is moving? Are the components strong enough to withstand normal movement from traveling on a road? | Per the owners manual you should NOT drive the vehicle while the crane is attached. | WTJ-HITCH |
| What is the height of the jack in the lowest position from the ground? | 2-3/8". | PM1-153-MINI |
| Can these systems be used with Edge-O-Dock Levelers? | No. The trailer lock systems can only be used with pit levelers. | TL-100-F-S, TL-200-HP-F-S |
| Is there an option for a power drive? | No, the power traction drive system (PTDS) is not available for the HYD-ROLL-47-DC. | HYD-ROLL-47-DC |
| What kind of batteries are in this unit? | Batteries are lead acid and not able to be upgraded to AGM batteries. | PMC-HIPM-21-DC, PMC-HIPM-27-DC |
| What are the interior dimensions of the CASE-M? | The interior dimensions are: 20.75 in x 15.5 in x 14.25 in. | CASE-M |
| What kind of batteries does the PM-2748-SCL-LP-E take? | The scale includes (1) 6V 4amp battery standard | PM-2748-SCL-LP-E, PM5-2048-SCL-E |
| What is the dimension from the triangular plate to the bottom of the jack of model FJ-K2? | 9" | FJ-K2 |
| What is the center hole size on the WHL-PP-6X2 caster? | The inside diameter with bearing is 3/4". | WHL-PP-6X2 |
| I’m looking for a scale to sit on a lift platform that can transfer the weight over to a PC (so the operator does not have to enter the weight). | All our scales are equipped with RS232 port to transfer the data. | MU-4848-5-BL |
| What size are the mounting holes on the BOL-CI-38-8? | The mounting holes are 7/8". | BOL-CI-38-8 |
| What force is required to begin pushing/moving CART-1000D-DC when it is loaded? | 70 lbs. | CART-1000D-DC |
| What is the safety factor for the EHN-20-C? | 1:1.25 | EHN-20-C |
| Is the FM-BAR hollow or solid steel? | The FM-BAR is hollow. | FM-BAR |
| Is the CART-1100-SS clean room suitable? | This cart is not compatible with cleanroom requirements. | CART-1100-SS |
| What is the height and width of the handle on the CART-PN-600? | The handle is 14 in wide and 32 in long. | CART-PN-600 |
| I am looking at the PST-PTDS-E. Is there a brake with the PTDS? | The PST-PTDS includes an electromagnetic disc brake with automatic dead-man feature that activates when the user releases the handle. (The PST-PTDS can be found under the options tab) | PST-PTDS-E |
| Does this lifter arrive assembled? | Yes, it comes assembled. | HWL-330 |
| Will the adhesive on the PVCG-D stick to concrete? | Yes | PVCG-D |
| What are the dimensions of the cord cavity? | 1-1/2" wide x 7/16" tall | MRHR-39 |
| Is the POS-1830 waterproof? | Yes. Polyethylene dollies will not warp, dent, or splinter like wood dollies. | POS-1830 |
| How many feet does the MSB-138 expand? | Expands to 138" (11.5 ft) | MSB-138 |
| For model STOR-96-G-W-1RH is the roof slanted? What is the snow load capacity? | Roof is not slanted. Roof can support snow weight up to 45 lbs per square foot. | STOR-96-G-W-1RH |
| What is the anti-corrosion treatment on the PPC chains? | The PPC chains are galvanized | PPC-20, PPC-40 |
| How long will the EPT-4548-45-RL run on a charge? | The pallet truck will run continuous for 3-4 hours. With intermittent use, the battery will last 7-8 hours. | EPT-4548-45-RL |
| How long does it take to charge the battery. | The battery will charge in 8-10 hours. | EPT-4548-45-RL |
| Can this table be used continuously? | The suggested use is 12 cycles per hour. | EHLT-4872-4-43 |
| What are the deformation indictors on swivel hook? | The deformation indicators measure hook expansion that happens over time and use. This is a safety factor to indicate when the hook should be replaced. | ELH-60-20 |
| What does uniform round capacity mean? | Uniform round capacity is the total capacity of the unit when lifting round steel. Because there is less surface contact with a round pipe the capacity is depleted. | ML-2, ML6, ML-12, ML-22 |
| How many "hand pumps" it takes to lift a cylinder? | It would take 12 pumps from lowered position to raised position. | LP-6 |
| What is the thickness of the metal where the fork pockets slide in? | The fork pockets are 3/16" thick. | FTTM-2 |
| Is the model RT-MS-62-AF compatible with the following accessories as well: RT-EPT-DBH, RT-EPT-MLH and RT-EPT-SDG? | Yes! The accessories work with the manual rough terrain stacker | RT-MS-62-AF |
| Are the EOP-440 and the EOP-550 CSA approved? | No the EOP-440 and the EOP-550 are not CSA approved. | EOP-440 ; EOP-550 |
| Can the handle be removed on the VWS-770-AA and use a drill to operate the lift? | At this time the standard unit cannot be actuated using a power drill. | VWS-770-AA |
| What degree of incline this unit can handle? | Zero. The move master will not perform with any incline. | PMM-1000, PMM-3000, PMM-3000-15 |
| In the options the WL-TSP can it be used with the voltage change WL-3HP? | No the WL-TSP needs to be coupled the the standard 6.5 hp motor. It cannot be used with the WL-3 hp. | WL-TSP |
| What is the maximum working height or the top step height on the A-LIFT-EHP-LAD option? | The top step height is 66.5" | A-LIFT-EHP-LAD |
| Does the DLH-CL2-1 work with plastic drums? | Yes this will work with plastic drums. | DLH-CL2-1 |
| Does/Can the scale integrate into a PC from the cart? | Yes it does. | CART-1000-SCL, CART-1000D-DC-SC, CART-1500D-DC-CTD-SC, CART-500-SCL, CART-500-SCL-PSS |
| Can the F-GRID be suspended on 2 x8's in place of decking for drainage on a deck? | No, the F-GRID needs to be fully supported underneath to maintain the capacity and they structural integrity of the product. | F-GRID |
| The FLB-D-10 is symmetrical and the hooks on the ends appear to rotate 18+ degrees. Can the beam be used upside down with a load cell on a central hook upwards and the load below from outer hooks? | Yes this product can be used “upside down”, using the center bail to either pick up the load or use it to hang the beam from a hoist to use the outer hooks to lift the load. | FLB-D-10 |
| Are the railings removable on series EMHC? | Yes, they are bolted on. The rails fit in a socket and then there are nuts on the other side. Railing ends are threaded | EMHC |
| Do you have fork extensions for the stacker? | We do not. Fork extensions are NOT recommended for use with the stackers. | S-62-FA,S-62-AA,S-118-AA,S-150-AA,S-62-FF,S-118-FF |
| The temperature is very cold, but well above the freezing point, our concern is on the effect of water/ moisture. Will the product absorb water? | The outer layers are made of the similar material as umbrellas with fabric in between. They are water resistant, but if you submerge the blanket water will be absorbed through the stitching holes. | DIB-96 |
| What is the lifting speed? | Lifting speed for the S-118-AA-FR is 18 seconds unloaded. When loaded lifting speed is 21 seconds. | S-118-AA-FR |
| Can you tell me how thick the shelving material is? | The shelving is 12 gauge. | DH-PH4-2472-3 |
| What is the distance of the bolt-hole spacing and diameter of the holes? Is the hole setback distance from the guard rail ends standardized on all lengths of the product? | All of the guard rail holes are 2-1/2" from the end with the middle hole centered in the length of the guard rail. | GR-H2R-BO-12-HDG |
| Is the CBFC-1000-DC CSA compliant? | Yes, the CBFC-1000-DC is CSA compliant. | CBFC-1000-DC |
| Is there a lid for the P-HOP-1.5? | Yes, the PLID-H-150 will work with this hopper. | P-HOP-1.5 |
| Can RDC-1000-5PO be used with plastic drums? | The RDC-1000-5PO is for steel drums only. | RDC-1000-5PO |
| Do these automatically return to the upright position after you pull the chain to dump? | Yes, they are self-returning, they may need to use the rear till on the fork truck but they will not need to get off the fork truck. | D-100-LD-NB |
| Is there an option for a removeable base with this guard? | Yes. You can purchase the HPRO-RF-BASE for the HPRO-60-42-4. | HPRO-60-42-4 |
| Can the ladder be installed on a counter balance lift? | No the ladder cannot be installed on the A-LIFT-CB. | A-LIFT-LAD |
| What decibel is the siren at? Can it be adjusted? | The decibel level is approximately 85 db. The volume is not adjustable. | ODG-120-BL |
| What kind of battery is on the L-220-DC-HD? | The L-220-DC-HD has an AGM battery. | L-220-DC-HD |
| Is the CART-1000-M ANSI certified? | Yes the CART-100-M is ANSI certified. | CART-1000-M |
| What is the maximum height of the S-CB-62-DDC when extended? | The height of the S-CB-62-DDC when extended is 95 1/2". | S-CB-62-DDC |
| What is the distance from the "HOOK" to where it attaches to the crane boom on the EHN-60-T when fully extended? | The distance from the attached chain to the hook is 13" | EHN-60-T |
| Does the 3 phase hoist have a plug or does it have to be hardwired? | The 3 phase hoists will need to be hardwired. | H-1000-3, H-2000-3, H-4000-3, H-6000-3, H-10,000-3 |
| What is the capacity of the FL-LKL-3? | The capacity is 9,000 lbs/ | FL-LKL-3 |
| For the PI-S-4400-3761 can it be stopped at 90 degrees? | The pallet inverter has a 180° rotation and can be stopped in between at any angle. | PI-S-4400-3761 |
| What is the thickness of the steel? | It’s schedule 10 pipe. .12” | LPRO-144-9-4 |
| Do you have a Div1 Class1 motor for the stainless steel lift table? | No we do not have motors for Div1 Class1. | EHLTG-4470-4-48-PSS |
| I purchased the ASP-36. Can I add a handrail? | Yes! There is a handrail option that you can install. Please contact your sales associate for details. | ASP-36 |
| For the portable scissor table with the power traction drive system, do both units us the PTDS battery or will they each have their own? | Both the power traction drive and the lifting portion of the lift will run off of the PTDS batteries. | PST-2448-2-46, PST-PTDS-E |
| For the portable scissor table with the power traction drive system does the battery have multiple charging ports? | Both the power traction drive and the lifting portion of the lift will run off of the PTDS batteries and have a single charging port. | PST-2448-2-46, PST-PTDS-E |
| Does the mounting hardware come with the posts? | The mounting hardware to mount the rails comes standard with the posts. The anchor bolts to mount the posts is an option and can be found under the options tab. | GR-H2R-BO-TP18-YL, GR-H2R-BO-TP42-YL, GR-H2R-BO-TP60-YL, GR-H2R-BO-TP72-YL, GR-H2R-DI-TP18-YL, GR-H2R-DI-TP42-YL, GR-H2R-DI-TP60-YL, GR-H2R-DI-TP72-YL, |
| For model VWS-770-AA-DC it says "Lifting Speed Loaded (seconds): 3.35". Is the measure of travel 3.35 inches in 1 second? | Yes. 3.35" in 1 second. | VWS-770-AA-DC |
| Are chains long enough to lift vertically? | You can lift both horizontally and vertically with model CDL-2000 | CDL-2000 |
| What is the inside dimension of the platform? | The platform inside dimension is 24". | HYD-5-LP |
| What are the dimensions of the top plate? | The top plate is 3.5" x 6". | FJB-150 |
| What is the spacing between the holes on the top plate? | The holes are 2.25" and 4.75" apart with a diameter of .5". | FJB-150 |
| What is the amp draw of the HDC-905-IDC/230V? | If set up for operation on 230V, single-phase, the motor nameplate full-load current is 12.8 amps. If set up for operation on 230V, three-phase, the motor nameplate full-load current is 16.8 amps. | HDC-905-IDC/230V |
| What is the thickness of the fork? | Fork thickness is 2" Top of fork from the floor is 3-1/4" | PM2-SF-848 |
| Will the S-2CB-42-FK forks come installed on the stacker? | When the S-2CB-42 is ordered with the counter balanced stacker, the original forks will be shipped on the stacker and the 42" forks will be sent along the side. | S-CB-62, S-CB-118. S-2CB-62. S-2CB-118 |
| What is the thickness of the polyethylene? | The wall thickness on these fork covers is 3/16". 2" is the maximum fork thickness these can accommodate. | F4-36, F4-42, F4-48, F4-60 |
| Do these plug in? | No. These do not have a plug. | VS-ECH-5-1PH |
| What is the longest usable cable? | The winch holds 25' of cable. | WTJ-E-15-3-AC |
| Can the projectors handle vibration from being attached to a crane? | The projector is good to be used on cranes, we have supplied to many crane applications. It is rugged for the crane vibration. | VSP-12-001, VSP-24-001 |
| What is the temperature range the projectors can operate under? | The working temperature is -30 to 55 C. | VSP-12-001, VSP-24-001 |
| Can this cart accommodate steel strapping that is 1 1/4" wide? | No it cannot accommodate steel strapping 1 1/4" wide. | STRAP-PS-HD |
| Do you know if the tube it's fabricated from is 1.00" diameter? | Yes it is. | DHHT-500S, DHHT-500S-HR |
| What surface can the wheel risers be used on? | We recommend a concrete surface. Asphalt may not be suitable for the wheel risers. | ATWR-18-6-48 |
| What surface can the wheel risers be used on? | We recommend a concrete surface. Asphalt may not be suitable for the wheel risers. | SWR-18-6-48 |
| What gauge is this? | The E-TRK-1-GY-10PK is 12 gauge. | E-TRK-10-GY-10PK |
| How many cylinders does the AIR-1500-D-PSS have? | The cart has 2 cylinders | AIR-1500-D-PSS |
| What is the amp draw on DRLT-CB-54-MDPL l when recharging? | We use 5 amp charger for charging the battery. | DRLT-CB-54-MDPL |
| What is the thickness of the top plate of the CA-60-6-TP-SSM? | The top plate is 1/4" thick. | CA-60-6-TP-SSM |
| What is the lifting capacity of the MMJ-6? | The 3,000 lb. capacity for the MMJ-6 is for both static and lifting. | MMJ-6 |
| What is the turning radius of this unit? | The turning radius of the VHPS-2200-AA is 47". | VHPS-2200-AA |
| What is the inside dimension between the forks? | The inside dimension between the forks on the EPT-4048-45-RL is 22 3/4". | EPT-4048-45-RL |
| Do the clamp pads have rubber on them? | Yes the clamp pads have rubber protection. | S-MU-VRGR-72 |
| What is the width when the forks are at maximum opening? | The forks on the VHPS-3000-AA-17 at maximum would be 33". | VHPS-3000-AA-17 |
| What is the temperature range of the heaters? | There is no temperature range these are designed to heat objects or to dry paint. The closer the heater is to the object the hotter it gets. The element temperature is 1500 degrees F on the bulb. | PIHP-4,PIHP-6, PIHP-11 |
| Can you tell me if the ACH series of air chain hoist is wash-down compliant? | The ACH hoists are not washdown compliant. | ACH-25, ACH-50, ACH-60, ACH-100 |
| What is the width of the actual hook on the D-FORK-10-SL at it's widest point? | The width is 5" | D-FORK-10-SL |
| What kind of steel is used in these ladders? | Our ATS ladders are built out of ASTM A36 hot rolled steel. | ATS-10-56 |
| What is the lowest temperature this unit can be used in? Can it be used in a below freezing environment? | These are not recommended for temps less than 20°F. The battery charge will not last as long in cold temps. The PEL's are not rated for use around moisture or condensation. | PEL-88,PEL-100,PEL400 |
| What is the battery life for continuous use? | The battery life for the EPT-2745-33 is 2-2.5 hours. | |
| What is the battery charge time for the EPT-2745-33 pallet truck? | The charge time is 3-4 hours. | EPT-2745-33 |
| What are the casters made of on the EHN-60-T? | The casters are steel. | EHN-60-T |
| What is the diameter of the hole for the axle? | The diameter is 1". | WHL-MA-10X2.5 |
| Do the PLP4-4840-BLACK plastic pallets have PFAS in them? | There is no PFAS in the black pallet. | PLP4-4840-BLACK |
| How many lifts per battery charge for the CART-1500-DC-CTD? | 20-30 cycles per continuous use per charge. | CART-1500-DC-CTD |
| What the thickness of the top deck is on LDLT-3096? | The top deck of the LDLT-3096 is 1/4". | LDLT-3096 |
| Would you please advise if the P-Jib-4 can be moved when loaded? | The P-JIB should NOT be moved while loaded. If you need to transport a load, I'd suggest the CBFC units | P-JIB |
| What is SWA-60-AW-SCL accuracy ratio? | 0.1% of the applied load | SWA-60-AW-SCL |
| What is the temperature rating for polyurethane foot pads on the FL-LKH-5 & FL-LKH-6 floor locks? | 120 degrees Fahrenheit | FL-LKH-5 & FL-LKH-6 |
| What are the ball sizes on E-TUG-SABH and E-TUG-HD-DABH? | Both hitches have a double ball that are 1-7/8" & 2" | E-TUG-SABH E-TUG-HD-DABH |
| What degree of incline or grade can S-CB-62-SDC handle? | S-CB-62-SDC is not made to be used on an incline | S-CB-62-SDC |
| How do End Plates, model SPB-NP-EP-RF, go onto the blade? | These end plates are retrofit, and require the user to drill the mounting holes. | SPB-NP-EP-RF |
| What is the distance between the two horizontal plates on E-TUG-HD-PINH? | 1-3/4" | E-TUG-HD-PINH |
| What is the diameter of the holes in CS-33-BL? | The usable hole is ˝” dia. With a 1 ˝” diameter top access hole (for a socket wrench). | CS-33-BL |
| Is MRBR-24 ADA compliant? | MRBR-24 complies with all applicable U.S. Federal OSHA regulations and U.S. national standards which are incorporated into U.S. national laws and/or regulations. | MRBR-24 |
| What is the fork thickness of model ALL-T-2? | 2" at the heel and tapers down to 1/4" at the tip. | ALL-T-2 |
| What is the length of the legs and forks for HYD-CRL-40? | The length of legs are 11 1/8" each and the length of forks are 20 1/8" each | HYD-CRL-40 |
| What is the steering arc for model ALL-T-2? | 180 degrees | ALL-T-2 |
| How do you raise and lower model WPT-1624? | Manual actuation. Variable positioning, essentially at whatever point along the service range, when tension is applied via the lock handle. | WPT-1624 |
| What kind of steel is model WBT-S-HD-BS-3072 made of? | 1/4" thick ASTM-A36 steel. | WBT-S-HD-BS-3072 |
| Does the front of CSC-DD have a pull down piece to close it off, or does it have to stay open? | The front middle of the CSC-DD cart stays open- it does not close. | CSC-DD |
| How many keys come with CSC-DD? | Each CSC-DD comes with 2 keys | CSC-DD |
| What is the turning radius of model PMC-PM5-1632? | The turning radius of PMC-PM5-1632 is 200 degrees. | PMC-PM5-1632 |
| What are the dims for the square tubing on EHN-60-T? | ID is 2-7/8" x 2-7/8" and OD is 3-1/8" x 3-1/8" | EHN-60-T |
| The description states "a padlock maybe added to prevent unauthorized removal". Where does the padlock attach? | The padlock goes into the base plate where the lip is with 2 holes are. The padlock is not included | BOL-RF-BASE |
| What is the clearance height of the frame to the floor for RT-EPT-3-48? | The clearance height of the frame to the floor is 5-1/2" | RT-EPT-3-48 |
| What is the clearance height of the frame to the floor for the ALL-T-4-GPT-L? | The clearance height of the frame to the floor is 5" | ALL-T-4-GPT |
| Does the ULM-EPT-2745-44 have an onboard battery charger? | No, ULM-EPT-2745-44 comes with outside (bench top) charger. | ULM-EPT-2745-44 |
| Is there an upgrade for lithium batteries for ULM-EPT-2745-44? | No, there is no upgrade for lithium batteries for ULM-EPT-2745-44. | ULM-EPT-2745-44 |
| What is the grade of steel used in SFS-149-SL? | Steel A36 | SFS-149-SL |
| What width of banding does STRAP-PS-HD accept? | Up to 1" wide poly and steel strapping can be used on STRAP-PS-HD. | STRAP-PS-HD |
| What is the recommended tank length for LP-6? | Approximately 29" | LP-6 |
| What is the maximum PULL CAPACITY of a HOOK-BASE? | Do not use the HOOK-BASE to pull loads of more than 2,500 pounds. Trailer + load must be 2,500 pounds or less. | HOOK-BASE |
| What is the 24" load center rating on the SL-63-AA? | 1,300 lbs. at 24" load center. | SL-63-AA |
| What is the 24" load center rating on the S-62-AA? | 1,300 lbs. at 24" load center. | S-62-AA |
| Does LPDT work with fiber and plastic drums? | No- LPDT will only work with 55 Gallon Steel Drums | LPDT |
| What is the turning radius of HYD-CB-10-DC? | The turning radius of HYD-CB-10-DC is 34-1/4" | HYD-CB-10-DC |
| Does EPT-S-2748-40 have an onboard charger? | EPT-S-2748-40 has a 24V/115Ah bench top charger, which is included with the unit. | EPT-S-2748-40 |
| What is the impact rating for the BOL-CI bollards? | These bollards are rated to stop 4,000 lbs. at 4 mph, when properly anchored into concrete. Please note, this type of impact will permanently deform the bollard and would need replaced. | BOL-CI-28-3,BOL-CI-28-5,BOL-CI-28-7,BOL-CI-39-5,BOL-CI-40-8,BOL-CI-38-8 |
| Does the DD-EX-E leave the chime attached to the drum? | Yes it does leave the chime on. It cuts inside the drum. | DD-EX-E |
| What temperature range can the leveling jacks handle? | 30 to 120 degrees Fahrenheit | LJ-9 |
| What is the cable length of the HYDRA-H? | Single line cable length: 9.85' Double line cable length: 5' | HYDRA-H |
| What is the safety factor for the AIR-1500-D cart? | 125 percent of the rated load (1:1.25) | AIR-1500-D |
| Do the steps of the SPN-2-YL-HR-PO have any resistance from slipping or sliding when used on a smooth floor? | Yes, these steps have 8 rubber feet on them | SPN-2-YL-HR-PO |
| What size ball hitch does the HDC-900-GPT accept? | 2" | HDC-900-GPT |
| Is there a maintenance schedule for PTB-19? | Maintenance should be performed every 6 months | PTB-19 |
| What grease type should be used for PTB-19? | NLGI 1 or NLGI 2- both will work. | PTB-19 |
| Does Vestil have a plastic 48x48 pallet that is FM certified? | No | |
| Can a ladder be added to an existing lift truck? | Yes a ladder can be added to an existing lift truck in the field. Choose appropriate model number that corresponds with for your lift truck, or contact sales with your lift truck serial number. | A-LIFT-EHP-LAD, A-LIFT-LAD |
| Is the vertical screw on LJ-17 solid or hollow? | The vertical screw on LJ-17 is solid. | LJ-17 |
| What kind of steel is the screw on LJ-17 made of? | The vertical screw on LJ-17 is ASTM 1045. | LJ-17 |
| How many pumps does it take to raise DRUM-LRT-ESJ to 53"? | It takes 56 pumps without load to raise DRUM-LRT-ESJ to 53". | DRUM-LRT-ESJ |
| How long does it take to turn the wheel for DRUM-LRT-ESJ to be able to dump? | It takes about 1 to 1-1/2 minutes to rotate the DRUM-LRT-ESJ to be able to dump. | DRUM-LRT-ESJ |
| Does the CART-1000-LT have a velocity fuse? | Yes. | CART-1000-LT |
| Does the ESE series chair and stool come with both the wheels and foot pads? | Yes, ESE-WC-2232 and ESE-WS-1927 both come with foot pads and plastic casters. | ESE-WC-2232 |
| How many seconds to fully raise CART-1000D-DC-CTD with and without a load? | With a load, it takes 18 seconds to fully raise. Without a load, it takes 16 seconds to fully raise. | CART-1000D-DC-CTD |
| Are any of Vestil's Drum Truck with Scales intrinsically safe? | No. | DRUM-55-SCL |
| What is the Amp draw for the EHU-3? | 18.5 Amps | EHU-3 |
| What is the usable height of the side walls on the deck of an EHLTG? | 9-15/16" | EHLTG |
| For D-TR-72, what keeps the extended ramp in place/what prevents the ramp from collapsing when extended? Is there some kind of safety anti-retracting device on the unit? When it is retracted, how does it stay in place? Is there some kind of latch or pin to hold it in the retracted position? | It is held in place from friction and ground contact. These are used at such a gradual angle that when the lip is resting on the upper surface, and the bottom of the ramp is in contact with the ground. There is a plate welded to the underside of the top ramp, at the upper end of it, and then there's also a plate welded to the TOP of bottom ramp section, at the lower end of it. This will prevent the two ramps from overextending/coming apart. | D-TR-72 |
| What kind of steel is the pole on your CR, CRF and CRP carpet poles? | Stress proof steel, 1144 ASTM A311-B | CRP-108, CRP-120, CRP-144, CRF-108, CRF-120, CRF-144, CR-108-2, CR-120-2, CR-144-2, CR-108-3, CR-120-3, CR-144-3 |
| Are the internal gaskets for LDP-SS-316 Teflon or silicone? | Are the internal gasketsare Teflon. | LDP-SS-316 |
| What is the size of the tubing of series CYL-FMSR? | 1-1/2" x 1-1/2" 14 gauge steel tube | CYL-FMSR-1 CYL-FMSR-3 |
| What material are the black circles on the PLP2 models and the orange circles on the PLP4 models? | The black and orange circles are rubber. | PLP2 and PLP4 |
| How long does it take for the battery to recharge for CBFC-500-DC, CBFC-1000-DC and CBFC-2000-DC? | We recommend charging the battery when it displays approximately 50% on the battery gauge. At this level, it will take approximately 10 hours to fully charge the battery. | CBFC-500-DC, CBFC-1000-DC, CBFC-2000-DC |
| How long can the battery be run before the next charge on CBFC-500-DC and CBFC-1000-DC? | If fully charged, the battery will run for approximately 28 minutes of total run time or approximately 160 complete raise/lower cycles. The battery gauge should display approximately 50% charge after running this many cycles. | CBFC-500-DC, CBFC-1000-DC |
| How long can the battery be run before the next charge on CBFC-2000-DC? | If fully charged, the battery will run for approximately 28 minutes of total run time or approximately 90 complete raise/lower cycles. The battery gauge should display approximately 50% charge after running this many cycles. | CBFC-2000-DC |
| What is the load center for S-114-AA-LION? | The load center for S-114-AA-LION is 22" | S-114-AA-LION |
| Does S-DK work with S-CB models? | S-DK does not work with S-CB models, but it does work with S-2CB models. | S-DK |
| What is the gauge of steel for the GR-F2R & GR-F3R rails? | 11 Gauge | GR-F2R, GR-F3R |
Before placing an order, please confirm that the ship to company is able to receive shipments on the estimated delivery date